If you wish to advertise on our site, please contact the advertising department and inform them on what pages and in what positions and in what form would like to see your ad. How about save yourself some dollars this time by building your own wooden boat instead of buying a ready made one?
Do It Yourself (DYI) shops that offer specifications, tools and materials are the best place to be when looking to make your own boat.
You can either make a small wooden boat or a large one, it all depends with your preference.
The first step is to put a sheet of plywood on top of two sawhorses for that much needed support.
Using a jigsaw you need to cut the sides of your plywood to your desired size, bow the pieces and have about five pieces. It is now time to drill holes on each side of your pieces of wood.1inch apart from the edges of the wood is the best measurement with a space of 4inches.
The SIMPLE 9 is an easy to build, easy to transport and easy to paddle small Kayak like boat. In brief, there are 16 frames including the transom, full length stringers, dual stepped keel set up, engine hatch assay and seat assay.


This iconic racing boat was originally designed by George Crouch in 1924 and went on to win the 1924 and 1925 APBA Gold Cup.
It has been said that the 16 foot Gar Wood speedster is, pound for pound, the most valuable classic production speed boat in the world. There are some 15 frames, 2 keels, twin hatch assembly, vertical cleats, gas tank fixing, drivers bench seat, breast hook, front and rear stems with knees etc. The next thing you need to do is transfer the plans on the paper to the plywood using a pencil.
Mix your epoxy glue as required and use the paintbrush to apply the glue the sides of the wood, it is easy just like applying paint, let the glue dry for 2hours.
The next step is applying fiberglass fabric along the seams of the boat; this is to make it strong.
It can also be equipped with a trolling motor for those that want the extra distance that a motor provides. The epoxy glue should be done ? inch deep and two inches wide on along the seams of the center. Ideally suited for first time builders, the design is lightweight and requires only hand tools normally found in a handyman's shop.


The SIMPLE 9 makes a good starter boat for children, and teaches them the basics of boat construction, and boat safety.
I found this to be a very advanced design in that the stringers start at the transom and end at Frame 2. Other than its impressive deck lines, Zephyr lends itself to a variety of engine sizes through its generous beam.
This tested plan has the corrected offsets incorporated into the lines so is suitable for full size construction without the need for correcting the lines and attempting to fair frames. Original offsets are notorious for errors as they were often measured up as a matter of record rather than used to build.



Renting boats in miami florida usa
Boat dealers in crisfield md news
Wooden boats sale uk
Nitro boat trailer light wiring