Penned by the late great Bill Crealock and introduced by Pacific Seacraft in 1984, the Dana, at only 24 feet on deck, is perhaps the consummate pocket cruiser. Although the Dana 24 has never been a cheap boat to buy, owners can console themselves with the lower maintenance bills from a blue water cruiser of diminutive size.
It could be said that the Pacific Seacraft of yesteryear had an affinity for pocket cruisers.
It was Bill Crealock, well respected for his seaworthy designs, who got the commission for the new boat and by 1984 the Dana 24 was introduced.
Pacific Seacraft ceased production of the Dana 24 in 1997, but after a three year hiatus interest was reignited as the economy slowed. In 2007, Pacific Seacraft entered receivership before changing hands to its new owner, Stephen Brodie. The Dana 24 is a moderate displacement cruiser, below the waterline you’ll find a full keel with a forefoot cutaway and a keel-hung rudder. The boat retains the signature cutter rig, that’s so popular among the blue water fraternity. The cockpit provides good protection from the elements and there are two generously sized cockpit drains. She has an open plan interior with hand rubbed oiled teak cabinetry, and a teak-and-holly sole that gives her a beautifully warm and inviting feel.
Beneath the forward berth are two large drawers and a drop locker. The cabin shelving has removable fiddles and the hanging locker is louvered for extra ventilation.
True to Pacific Seacraft tradition, the hull and deck are solidly constructed from hand laminated fiberglass. Since 1989 the boat has had eight rectangular bronze port lights in place of the original round bronze ports. Like all Crealock designs, the Dana 24 integrates a good deal of comfort in a well controlled and balanced hull. Light air performance is not her strength, unless set up particularly well and skillfully sailed, don’t expect too much boat speed, she is after all a heaver displacement boat on the grand scheme of things. One acknowledged weakness is her inability to hove-to, her high freeboard in her bow sections coupled with a big forefoot cutaway on her keel means her nose is too easily knocked away. The Dana 24 is a well proven boat and to date no significant weaknesses in her construction have been found. Add your stories, experiences, tidbits, updated information - whatever you think is useful to others. I bought a Dana last year and her name is Wizard’s Tide we were wondering how she got that name. As you queried I have been unable to find the information to verify the claim of circumnavigation in a Dana 24 and have altered the article accordingly. Also: I am not sure about your information on the Dana being the first commissioned boat Crealock designed for PS. I do know personally of at least two Atlantic crossings; and four Pacific crossings (including one to New Zealand and one to Japan).

The pre-1998 run ended with a hull number in the 200s … #222 was built in 1997 and the last one of which I know in the series. You can verify these numbers with Max at Seacraft Yachts but a total run of 348 is NOT accurate. Via email, text message, or notification as you wait on our site.Ask follow up questions if you need to. Thank you for using our site, My name is XXXXX XXXXX I will be helping you with your problem.There is no factory dash wiring diagram for your boat.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions. The boat combines traditional styling with the kind of keen craftsmanship and solid construction upon which Pacific Seacraft built its reputation. Her shallow draft allows for exploration in cruising grounds larger yachts cannot, and her design, now over 25 years old, is well proven with a number of ocean crossings to her credit. Right from the get go, the company introduced the Pacific Seacraft 25 and later the Orion 27, both strong and capable offshore cruisers designed by one of the co-founders himself, Henry Morschladt. She was fairly well received, in fact a respectable 222 boats were sold in the subsequent fifteen years before a booming mid-1990s economy shifted interest to bigger boats.
In this time there’s been little to improve upon the little Dana 24, the boat remains almost unchanged, a true testament to the quality of Crealock’s original design. Her sheerline is elegant and she has a memorably plumb bow with a teak bowsprit platform. Compromise on her size means that she is lacking the distinctive Crealock double-ended stern in favor of a wide and almost vertical transom.
Some have optionally been setup for single handing with sheeting and halyard lines led back into the safety of the cockpit.
The interior layout demonstrates excellent functionality and clever use of space. Her interior space is around 50% larger than other boats of similar length, making her feel like a much bigger boat. The dining table slides out from underneath the v-berth,  above the two drawers, and is a particularly clever feature, having a hinged center which fits around the interior metal post and can be fully or partially extended.
The innermost layers are polyester and the outermost layers have utilized osmosis resisting vinylester resin since 1989. Lead is used as ballast and is encapsulated in fiberglass.  All through-hull fittings are solid bronze. She’s seakindly boat with a mellow motion through the water and her high ballast ratio (nearly 40%) no doubt helps her ultimate stability. In a breeze the Dana comes to life, she points well to windward and sails her best on a reach, while downwind her keel and hull form tracks well without a hint of squirming and with less roll than most. For further research, it’s recommended buyers consult the active community of Dana 24 owners who have an email list running at Yahoo Groups (see below for a link). From pictures it looks like the interior teak was reduced substantially, were there actual changes or did they just take a hair cut on the profit margins? We also can make it according to your requirements since we are a manufacturer and have advanced engineers.
DIYTrade accepts no responsibility whatsoever in respect of such content.To report fraudulent or illegal content, please click here.

It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult. I liked that I could ask additional questions and get answered in a very short turn around. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know. Yet for all her offshore capabilities she is one of a select few that can go home on a trailer. Instead the molds passed to a dealership in Seattle called Seacraft Yachts who have made the boat available once again (starting with hull number #351). A flip down cover over the stove provides extra counter space to work with, as does another in the seating area. Chainplates are through-fastened to the hull with stainless steel bolts and full backing plates.
The Crealock philosophy being comfort and stability translates to lower crew fatigue and faster, safer passages.
A new Dana will set you back in the region of $150k USD for the basic model without any of the large range optional and extras. Most of these recent boats are listing for more than that 2001 base price in 2014 which is interesting.
I ordered, bought, and still own Pacific Seacraft’s Dana 24 Hull #348, the last Dana made by Pacific Seacraft.
Also you can download wallpaper for mobile devices (iPhone, smartphones, telephones, tablets).On this site you can find the most beautiful pictures on your desktop in high resolution and good quality.
To starboard there is an enclosed head are with head, integral shower pan, hanging locker and sink with hand pump. The hull to deck joint is a double flange bedded in high tensile polyurethane adhesive compound and through-bolted with stainless bolts.  The interior module is also of vinylester resin and is bonded to the hull with fiberglass mat and woven roving.
By the early-1980s the company was looking to augment Flicka with a larger boat of similar style. I have used the boat for local coastal cruising in the Pacific Northwest’s Puget Sound.
Between 001 and 226 there were some cancelled numbers – but I have not taken the time to determine how many. I had the boat delivered with a minimum of extras; for example, all three sails are traditional hank-on types. Tom Cooper of Seacraft Sales in Seattle, Washington has continued the Pacific Seacraft production of the Dana 24, and knowing Tom, expect that his boats will be very well make also.

Wood speed boat plans free woodworking
Aluminum boats tiller youtube
Lesro model boat kits beginners