Building a nice park bench is a straight forward process, if you use the right plans for your needs and budget. Smart Tip: You need to build several wooden components and to secure them together with different types of screws and bolts. Smart tip: After you have cut the components, we recommend you to smooth their surface and edges with a sand-block. Enhancing the rigidity of the garden bench is easy, but essential for your woodworking project. After you have built and secured the components together, you should sand the surface of the bench with medium grit sandpaper and apply several coats of varnish. Smart tip: Installing a stretcher between bottom cross-braces would add support to the bench. The measurements for the braces are shorter in the materials list than what you show later in the plans. An outdoor storage bench is very useful, as it offers a significant space to deposit items you don’t use on a regular basis.
Top Tip: Buy lumber designed for outdoor use, which is weather-resistant, such as treated cedar.
Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Place the components on a level surface and align them properly, making sure the corners are perfectly square. Build the both sides of the bench, in the same manner described above and lock the frame together. Top Tip: Use a spirit level to make sure the frame is perfectly horizontal and the sides plumb, before inserting the wood screws.
Top Tip: Apply wood glue on the edges of the slats, before locking them together, to enhance the bond and to wake the joints waterproof. Smooth all the exposed edges of the bench, using a sand-block, otherwise you might easily injure in the sharp edges.
Top Tip: Apply several coats of wood stain to protect the wood from rot and to enhance its rustic appearance. There are many plans and designs to choose from, so make sure you take a close look over the rest of the bench plans featured on our website.
Drill pocket holes at both ends of the 1×6 supports and fit them into place, as described in the diagram.
In order to get a professional result, we recommend you to attach the 1×6 slats to the frame of the bench. Top Tip: If you want to enhance the look of the woodworking project and to protect the table from decay, we recommend you to cover the components with paint or stain. We show you how to build a simple bench by yourself in just one weekend, while keeping the costs under control.


Moreover, building an outdoor bench is a cheap project, as it should cost somewhere between 50 – 150 dollars (according to the used materials ). There are many outdoor bench designs to choose from, but in this article we show you how to build a simple bench, at a low cost. Therefore, use 2×6 wooden boards to build the front leg and the back support, according to our free plans. In order to obtain a rigid and durable structure, we recommend you to cut the braces from 2x4s or 1x4s. Nevertheless, you can adjust the gaps between the boards, to satisfy your needs and tastes. As you can easily notice in the image, you need to fit a 2×4 stretcher between the bottom braces of the bench. If you want to protect it from water damage, you have to freshen up these coats, every few years. This is a nice weekend project, as it’s a great opportunity to work with wood and to build something beautiful with your own hands. In addition, if you use the right woodworking techniques and choose a nice design, the wooden bench would be the perfect place to relax during the summer days. Therefore, you should select straight 1×6 boards and cut them to the right size, using a mire saw with a sharp blade. As you can notice in the free plans, the back legs are angled, in order to enhance the look of the storage bench. Next, place the seat with the battens downward-oriented and make sure it is aligned properly. Alternatively, you could install a continuous hinge between the joint of the lid with the stationary slat.
Don’t forget to countersink the head of the screws, if you want to obtain a professional look.
As we have already said, you need to leave small gaps between the flooring slats, to allow the water drain properly.
If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result. If you want to learn more about building a simple bench, we recommend you to pay attention to the instructions described in the article. Plan everything with attention and adjust the size and the shape of the bench to suit your needs. Drill pocket holes along the exterior edges of the side legs and secure them to the perpendicular components.
Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.


It is a lot cheaper to use pressure-treated lumber, but a cedar bench would have a distinguished look.
Make sure you cut one end of the braces at the same angle with the pitch of the back supports. Before locking them into position, we recommend you to sand their edges with a sand block and to cover them with several coats of wood stain.
Draw two parallel lines before drilling the pilot holes, in order to obtain a neat look and consistent results.
First of all, you have to measure the size of the back support, to determine the gap between the slats. When I say the ends should be cut at 75 degrees, you need to make a 15 degree cut to the ends. There are many designs and plans you could choose from, but in this article we show you how to build a simple bench using just 1×6 boards and the appropriate screws. You could also use 1×1 cleats, if you going to store lightweight items inside the bench. Before driving in the screws, we recommend you to align the slats properly, making sure the diagonals of the lid are equal.
Mark the curved line on the 1×6 boards using a pencil and make the cuts with a jigsaw. Next, sand the wooden surface with 120-grit sandpaper, making sure there is a smooth transition between the patches and the rest of the wood. There are many other designs and plans to choose from when building projects for your backyard, so make sure you take a close look over the related plans that are featured on our site. Plumb the legs and make sure the corners are right-angled before inserting the galvanized screws into place.
In addition, if you choose an area under a large tree, you will enjoy the summer afternoons a lot more than before. If you want to customize your bench, you could adjust the angle of the back support to fit your needs (75? cut). Regarding the bolts, you can use any type of bolts provided they are long enough to go through all the components and leave exposed enough thread to tighten the nuts.
If you plan to  place the bench in your backyard, you need to buy weather-resistant lumber, such as cedar, redwood or pine. Afterwards, apply a good wood filler in the holes, let it dry out properly and sand the surface thoroughly, before applying the final coats of stain.



12x16 gable roof shed plans 9x12
4x8 wood shed for sale ottawa
Keter garden shed nz
Garden sheds for sale ebay uk


Comments to «Free garden bench plans woodworking»

  1. Santa_Claus on 22.05.2014 at 16:15:12
    Straightforward build and may work well.
  2. 45345 on 22.05.2014 at 13:15:19
    Reflective layer on prime of that - or the info opening.Assemble.
  3. EFIR_BOY on 22.05.2014 at 20:45:29
    Even create toe kicks on the edges excellent worth when in comparison with the corresponding.
  4. Romeo777 on 22.05.2014 at 17:46:38
    Prefabricated constructing will dictate that his the usage.