The easiest way to build the roof of the 12×16 shed in just a weekend is easy, but you need to take a few aspects into account. Building a roof for a large shed is a straight forward job, especially if you plans everything from the very beginning.
Smart Tip: Building front and back overhangs for the shed will not only enhance the look of the construction, but also protect the building from heavy rain. After installing all the wooden trusses to the top plates, you need to continue the project by fitting the gable ends.
Building the overhangs is a straight forward job, if you follow the right plans and use adequate materials. Make sure you coutersink the head of the screws and drill pilot holes, to prevent the wood from splitting. You could adjust the size of the sheets to the right shape using a circular saw with a sharp blade. One of the last steps of this project is to attach the 1×6 trims to ends of the wooden rafters, as well as to the side ends of the large shed. Thank you for reading our article about how to build a roof for a 12×16 shed and we recommend you to check out the rest of our projects. Haha… If I had time I would come to give a hand to everybody, as sawdust is my addiction.
For anyone else making this, you might want to go with 9 boards for your roof instead of 8. Why do the overhangs require 2 x 6 spacers if the frame itself is made of 2 x 4 construction ??? If you want to get the job done quickly and to obtain a neat appearance, we recommend you to build a gable roof for your small shed.
After you have built the main frame of the small gable shed, you should continue the project by installing the trusses and the rest of the roof. Top Tip: From our previous experience in the field, we recommend you to build the trusses and the rafters on the ground, making sure they are all equal ins size and shape. Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet!
Drill pilot holes in the components and lock them together tightly, using 3” galvanized screws.
Before installing the front and the back overhangs, you have to attach the exterior siding. Afterwards, install the roofing felt into place, starting from the bottom of the roof up to the top. The side drip edges, placed at the bottom of the roof should be fitted under the tar paper.
If you want to learn more about garden shed roof plans, we recommend you to pay attention to the instructions described in the article.
A gable roof is one of the best choices when building a garden shed, as it has a very nice appearance and it adds value to your woodworking project. If you really want to make your garden shed stand out and to protect it from bad weather, we recommend you to build front and back overhangs. Fit the trusses to the top plates and secure them into place, making sure they are equally-spaced. The next step of the project is to drip edges at the bottom of the roof, as shown in the image.
After attaching the 3-tab shingles into place, the roof should look similar to the one in the image.
PRO TIP: Fill the holes with a good wood filler and smooth the surface with medium-grit sandpaper. Foundation: This article will assume you are building a shed with a wood rail foundation since that is a very common type of construction.
The end sheeting is installed as full sheets and then cut off to match the angle of the roof trusses.


Roof Trusses: After the walls are sheeted and stood up it is time to put on the roof trusses. Build The Shed Door: The shed door is built to fit the opening that was framed in the wall. Build A Ramp: The floor joists make the shed floor higher than the ground so you will want to build a ramp or stairs to make it easier to get in and out of the storage shed. If you want to see more detailed instructions on the steps to build a shed then come on over to the website shed department and keep learning. After building the base of the shed and fitting the wall frames, you need to continue your project by fitting the rafters and the rest of the roofing components. If you want to get the job done quickly or you don’t have a large expertise in the field, we recommend you to build a gable roof for your storage construction.
In order job get the job done accurately, we recommend you to build all the components and afterwards to lock them together tightly. In addition, make sure the size of the overhangs fit your needs, as later will be impossible to change something. As you can see in the image, you need to make sure the strips of roofing felt overlap at least 2”. As you can see in the image, you need to adjust the size of the trims with a circular saw, making sure you don’t tear the edges. Therefore, in order to get the job done as a professional, you need to check if the roof structure is secured properly together. Don’t forget to share our projects with your friends, by using the social media widgets.
Tom built this shed, as you can see in the Your Photos section, so it is not an impossible project.
In this article we show you all you have to know before building the roof of a gable roof, in order to get the job done by yourself in just an weekend. On one hand, the process is not as complex as compared to a barn, while on the other hand, it also requires a small amount of materials.
If you take accurate measurements, use proper tools and work with good judgement, you will obtain a professional result. Afterwards, fit them into place and lock them into position with the appropriate galvanized screws.
Work with great attention, making sure all of them are perfectly equal, otherwise the gable roof won’t be even. Therefore, one of the easiest techniques is to reverse the shingle table with the cuts up and to lock them into place properly, using appropriate screws. You could also snap a chalk line before locking the shingles into place, to be be a guidance line. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. There are many things that you should know about building a garden shed roof, so make sure you read the article and take a look over the rest of the shed project, as to get accustomed to the building techniques and materials required for the job. Don’t forget that you should also add front and back overhangs to the garden shed, if you want to protect the components from water-damage and to get the job done in a professional manner. As you can easily notice in the plans, we recommend you to take accurate measurements and to cut both ends of the components at the right angled, by using a miter saw. Assemble the overhangs on a level surface and attach them to the roof structure by using several screws and waterproof glue. Therefore, we recommend you to check if the components are locked into place properly and structure is rigid enough to support the firewood.
Apply several coats of paint or stain over the components, in order to protect them from decay. If you have enjoyed the free project, we recommend you to share it with your friends, by using the social media widgets.
A garden storage shed is the simple solution to adding more storage for an overflowing garage or simply a great way to add a private office or retreat in the back yard.


I build the end walls first because they go from the edge of the floor to the other edge of the floor.
The shed trusses are built on the floor of the shed and then placed on the top of the wall plates. Design everything from the very beginning, otherwise you won’t be able to make a cost estimate and you might be taken aback by many potential issues. Afterwards, align the rafters at both ends and assemble the trusses on a perfectly level surface. Generally speaking, the trusses should be equally spaced, so place them every 24” on center.
Remember that it is essential to make all the roof trusses exactly the same, otherwise you won’t be able to install the roofing sheets.
The edges of the sheets should be flush with the roof, so make sure you take into account this aspect before inserting the screws. In addition, make sure there are no gaps between the shingles and the trims, otherwise fill them with beads of silicone. If you want to save a significant amount of money, which you could invest in quality materials, you should follow our step by step instructions and build the roof of your shed by yourself.
Nevertheless, you should work with good judgement, as all the trusses has to be equal, otherwise the roof won’t have an even shape nor a symmetrical look. Make sure the joints between the sheets are exactly over the rafters, otherwise the roof won’t be rigid enough. Work with attention and assemble the trusses on the ground before attaching them to the top plates. The next cap should overlap about 2” from the previous asphalt shingle. Work with great care and attention if you want to obtain a professional result.
Don’t forget to check out the rest of the project, if you want to learn more about building this shed.
I am really glad you managed to get the done and I would love to see how your shed turns out. The project is straight forward, as you need to assemble the trusses on the ground and then to fit them into place, with the help of another person.
Today I decided to draw the steps to building a shed and post them so you can easily see them. It is recommended to put 2 inches of gravel under the whole shed to keep weeds down and make it less inviting for bugs and pests to make a home.
Regarding those 2 pieces of 2×6 lumber left, I think you have to send them back or use them for another awesome project.
The side walls go in between the end walls so they will need to be 7 inches shorter than the length of the side of the shed. I spent a few days looking around for what I felt was a good, full set of plans and I arrived at yours. So if you are considering building a shed and wondering where to start then have a look at these steps and then cruise on over to Icreatables Building A Shed page for more information including Shed Plans, shed ideas and a great How To Build A Shed Tutorial. This article describes how to build a simple 8ft.
For illustration purposes I drew a side and end wall first and then drew all four shed walls framed.
When you build a wall you will make sure it is perfectly square and then apply the siding to keep it square.
Not the best product, but it seems to work decent and add a small, yet noticeable extra layer of defense against water.



Cost of 10 x 14 shed kit
Sentinel self storage calgary nw


Comments to «How to build roof trusses for a small shed plans»

  1. LUKAS on 10.10.2014 at 19:18:29
    The proper wood shed for messy and cluttered.
  2. 2oo8 on 10.10.2014 at 12:20:12
    Hour safety system and be sure that.
  3. dinamshica on 10.10.2014 at 20:23:32
    Handyman Magazine Flip your patio or deck plans and might perceive build it yourself!, Methods to construct.
  4. GTA_BAKI on 10.10.2014 at 21:10:56
    That do not even understand the (four) full dimension cupboards for storing it for future needs.