Either you worked hard to obtain your fuel supply or you paid a small fortune to buy it, bottom line you need to protect it for future use. It is no secret that New England winters don’t seem to be getting any easier and fuel costs remain a concern for most people.
If you are looking for a new shed, a customized structure of any kind such as a new one car garage, firewood storage and drying unit, a workshop, or animal shelter, etc., call Shedmaster Sheds, at 1-800-618-8118, you will be glad you did.
Smart Tip: You could also use regular pine slats, but you need to protect them against decay, using appropriate products. Build the rest of the rafters (intermediate rafters) out of 2×4 lumber, cutting their both ends at 60?. Aligned the rafters at both ends, otherwise you won’t be able to fit the roofing sheets. Smart Tip: Use a circular saw with a sharp blade to cut the sheets along the cut lines, to avoid damaging the edges. Attaching the side and back walls is optional, but it will most likely not only improve the look of the shed, but also protect the firewood from heavy rain or snow.
This lean to wood storage shed is a sturdy construction, so it can resist and serve you for many years in a row. This shed is narrow enough to fit any space, making it the right choice if you want to store a small quantity of firewood. Thank you for reading our article about how to build a wood shed and we recommend you to check out the rest of our projects.
Designed to season cut wood for indoor and outdoor burning in fireplaces, outdoor fire pits, chimineas, etc. Polyethylene translucent fabric cover allows light in and retains heat so wood dries faster. Package includes steel frame, translucent polyethylene cover, 1 zippered front panel with screen vent, 1 rear panel with screen vent, vapor barrier flooring, ratchet tie-downs, 15" auger anchors, bungee cords, and complete instructions. When buying the lumber, you should select the beams with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay).
Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! A firewood storage shed is a straight-forward project if you choose the right plans for your needs and budget.
Top Tip: Place a nail or a piece of wood between the slats, in order to obtain consistent gaps. Installing the rest of the rafters is a straight forward job, but you still have to pay attention to several aspects. If you want to build a firewood shed with a neat appearance, we recommend you to hide the edges by installing 1×3 wooden trim. Top Tip: In order to protect the firewood storage shed from wood decay or water damage, apply several coats of varnish or paint resistant to water. If you follow our instructions and use the right materials, you should build a durable shed with a nice appearance. Top Tip: Plan everything from the very beginning if you want to get a professional result and a quick construction process. I’m thinking about using this for part of my Eagle Scout Project and would like to know an estimate cost. I mentioned in the article that 2×6 might be an overbuild, so if you want a quick project and to keep things simple, use 2x4s.
It is convenient to keep a day or two’s worth of firewood and kindling near your fire source. You also have a few options on how to transport your firewood from outside to inside your home.
In the end, you should choose a firewood storage solution that is based on your needs and abilities. Throw away that old ugly blue tarp and place your wood or other outdoor items in one of our stylish Firewood Sheds. Many hearty New Englanders have opted for alternative methods of heating their homes, one of which is the tried and true wood stove.
We will build you a unit so you can keep your firewood neatly stacked and dry so that it is ready to use when you need it most.


Building a wood shed is one of those projects that pay off especially during the cold winters.
First of all, we recommend you to buy quality lumber (pressure-treated lumber or pine) and check if the slats are in a good condition.
In addition, check all the corners for squareness and make sure the corner posts are plumb, using a good spirit level.
Apart from being a relatively easy project, as you don’t need many skills to get the job done, it also implies a small investment.
Make sure the slats join on the middle of the joints, otherwise the floor won’t support the weight efficiently. In order to get the job done quickly and to get a professional result, we recommend you to build each corner leg from two 2×4 slats. As you can see in the image, you need cut the ends of the side rafters at 60? (use 2×4 lumber), as to have a proper access to the interior of the shed, as well as to drain the water properly. Drill pilot holes trough the rim rafters before driving in the galvanized wood screws into the end of the rafters. As you can see it has a neat modern design, so you can place it near your house without damaging the style of your property. First, fill the holes with wood putty and afterwards to sand the wooden surface with medium-grit sandpaper.
If you have followed our tips, your wood shed will store the firewood for many years in a row. Don’t forget to share our projects with your friends, by using the social media widgets, if you have found them useful and to help us create more free plans.
Budget priced 5' x 3'6" x 5' shed reduces the seasoning time needed to get wood ready for burning. In this article we describe the main techniques and methods required for this backyard construction, along with a complete list of materials. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the firewood shed won’t have a symmetrical look.
In addition, this woodworking project would take only a full day of work, if you use appropriate materials and master the basic carpentry skills. If you make a few changes to the shed, you should also adjust the list of materials required for the job.
Therefore, you have to level the terrain and place four large concrete blocks on the corners of the shed. As you can see in the image, you have to drive 3” screws or nails trough the slats in the joists.
Nevertheless, we recommend you to plumb the posts with a spirit level, before securing them with screws.
In order to build these components and to keep the expenditure under control, we recommend you to use 2×4 pressure-treated lumber.
First of all, place the 2×4 rafters equally spaced and align them at both ends, before securing them with screws. Work with good judgement, making sure you don’t over-tighten the screws, otherwise the wood might split. Afterwards, you have to install the asphalt shingles one by one, from the bottom of the roof to the top. Moreover, secure the trims into place with finishing nails and fill the holes with wood putty. You could adjust the size of the shed to fit your needs, but you need to place more concrete blocks under the frame, if you plan to store a large quantity of firewood.
If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.
However, if one actually takes the time to read all the instructions, everything would be very clear. In one diagram you show the front and back posts as flush with the deck and the side posts overlapping them. Open sides or slatted sides provide air circulation which is especially important if your wood still needs to season. Align all the components at both ends, before inserting the galvanized screws into place, otherwise the end result might not fit your needs properly.


In order to build the wood shed, you need to use pressure-treated lumber, as the components will resist against rot. As you can see in the plans, you should drill pilot holes trough the rim joists before driving in the 3” galvanized screws.
Use a spirit level to check if the front and the back rafters (use 2×4 lumber) are perfectly horizontal. Fit the back and drip edge under the roofing felt, while the side drip edges should be installed over the felt. I have designed the plans to keep the expenditures under control and to involve the least amount of work possible, so that you can learn how to build a wood shed.
If you have all the materials and tools required for the project, you could get the job done in about a day or at most a weekend. As compared to other complex projects, building a simple firewood storage shed required common tools, such as: a circular saw, a drill machinery, a framing square and a tape measure.
This is a cheap method to build the footing of the shed, but you could also pour a concrete slab for a permanent construction. In addition, use a spirit level to make sure the floor is horizontal, before driving in the 3” screws trough the rim joists in the beams.
Cut the top end of the side beams at 15?, in order to obtain a proper slope for the shed’s roof . SHARE our projects and follow us on the social networks to help us keep adding free woodworking plans LIKE us on Facebook to be the first that gets our latest updates and submit pictures with your DIY projects. Let me know if you have any questions regarding the project and if you do build the shed by yourself, make sure you submit it so we can all see it!
One of the persons that built this used discounted lumber and spent under 50 $ on the materials.
Regarding your second concern (fitting the lag screws in the end grain of the base frame), you could make the front and back joists longer and the side joists shorter.
We are able to build a dual purpose firewood shed, half partially open for your fire wood and the rest enclosed for basic storage. There are many designs and plans you could choose from, so you should take a look on the alternatives, before starting the actual constructions. In order to save money, you should go to several lumberyards and ask an estimate for the materials required for this job and choose the best offer in terms of quality and price.
You should also check out the rest of my firewood shed plans, if you want more alternatives when it comes to storage capacity of design.
But the instructions show using 1×6 for the decking, which makes more sense to me anyway. The materials list takes into consideration 2x4s for the decking slats, so if you want to use 1x6s, make sure you make the modifications before buying the materials. However, if you follow the second diagram, the lag screws for the front and back posts would have to go into the end grain of the base frame.
Regarding the second issue, fitting the posts the other way around will influence the plans (the side rafters should be longer and the front and back ones should be shorter than in plans). We can construct your firewood storage unit to your specifications, with or without doors, and with various roof styles. If everything is planed from the very beginning and use proper materials, any diy-er can can build the basic shed in just a few days. Afterwards, you should get a drill machinery, a circular saw, a handsaw with fine teeth, a hammer, a spirit level and a tape measure.
If you aren’t prepared to make modifications to the plans, you should take the posts off and fit them again properly. All custom shed designs and construction are individually quoted at the time of the specification development.



Patio deck planter boxes ebay
Cambium woodwork (2005) ltd
Tree bench woodworking plans
Sheds n homes western sydney & penrith uk


Comments to «Small firewood shed plans 02»

  1. Lerka on 13.05.2014 at 13:22:44
    Lots more timber that may match with your your media cabinet.
  2. RoMaSHKa on 13.05.2014 at 15:38:47
    Your desktop within the following five minutes, whether inside, however.
  3. alishka on 13.05.2014 at 15:42:34
    Tools, and different gardening the perfect.
  4. Inaplanetyanka on 13.05.2014 at 17:15:32
    The surroundings in the course of the different seasons.
  5. ODINOKIY_VOLK on 13.05.2014 at 17:38:59
    For the shed, storage and even in the when I get too previous.