Diy cupboard door ideas,garden shed greenhouse ideas building,design desk india pvt ltd - Easy Way

January 23, 2013 by Kristi 67 Comments Last night I did something that I’ve wanted to do for quite a long time.  I figured out how to make cabinet doors without using any kind of special tools!
My original plan was to just add some pretty trim to the existing doors and drawers, and then paint everything.  That definitely would have improved the doors, but there are two reasons I decided not to go that direction.
That did a great job at dressing up the front, but obviously I had to do something to cover up the edges since you can see where the plywood edge meets the trim.
So next I took this really small trim (I have no idea what this is for, but it’s incredibly cheap, and rounded on both edges), and cut pieces to cover the edges of the door. And the last step is to add wood filler to the nail holes and the tiny spaces between the front trim and the edge trim.  Once everything was sanded down, the two pieces of trim actually looked like one continuous piece of trim. And the thickness turned out perfectly!  The thickness of the new door is only slightly more than the thickness of the old door. I am thrilled that you posted this AND with pictures, I am dying to do this to my kitchen, cabinets and have not been able to visualize it.
The only thing you have to worry about with handles on cupboards is that sometimes you can get your finger stuck in them when they swing out.
Sooooo excited to see someone tackle making door fronts as I have 33 kitchen cupboards that are in desperate need of a makeover but the pocketbook doesn’t have enough in it to get ready-made. If you have the patience for it, this is definitely a great way to save money on a kitchen makeover! Kristi… can you rewind a little and tell me where you put the small trim that was rounded on both ends?
This cupboard deserved a second lease on life, I thought when I came upon it in the alley last month.
This became the challenge for a new look, how to bring out its personality without going too far and ending up with a prom queen wannabe. She also writes the Tossed and Found column for Time Out Chicago and pens the blog Garage Sale Warrior for the Chicago Trib’s Chicago Now. Keep up with the latest Challenges news, and creative design & decorating inspiration when you Subscribe to Homeworkshop's Design Junkies Journal. Installing new cabinet doors in your home is a fairly easy and affordable DIY Project that can be completed in a few easy steps.
The first thing you need to do is identify exactly which cabinet doors you are going to be replacing.


After identifying which doors you will be replacing you need to take measurements in order to know how much plywood you will need.
I spoke briefly about the measurements of your cabinet door; you will now need these to create your doors. Firstly you should mark out your measurements with a pencil on the wood you are going to use, do this faintly in case you need to rub any of it out. Then using your saw simply cut your cabinet door out and you are ready to attach it to the carcass.
When it comes to replacing or renovating kitchen cabinet doors you will need new concealed hinges.
The hinge simply slides onto the mounting plate to connect and allow the mechanism to work correctly.
If you require your cupboard door to sit inset within the carcass frame then you would choose the inset concealed hinge. This hinge will pull the edge of the cupboard door to the carcass when shut; while also allowing it to open freely. The first thing you need to do is drill your door, you will require a hinge hole cutter in order to get the correct sizing for a 35mm hinge hole. If you have bought slide on hinges you will have to place the hinge on top of the mounting plate before securing it with the screw on top.
For horizontal adjustment you can move the door using the hinge, this can allow you to move the door in and out. To finish your DIY project of replacing and renovating your kitchen cabinet door you may want to add a new kitchen handle. Written by Ryan HirstHi I'm Ryan and I am the online marketing assistant at Eurofit Direct.
It’s DIY time with furniture and accessories makeover specialist, Contributor Diana Durkes.
It was in well-used but sturdy shape and had a girl-next-door friendliness about it–plain and pretty. Cool turquoise, celery green and a medium bright pink were also colors that came to mind for this small piece.
This is the keeper, and with makeover complete, this chest is ready for its sunny new life.


She gives a makeover to one found item each week, and publishes the before & after on her blog, Fine Diving. Whether your cabinet doors are looking run down or are creaking it can be a good way of improving the look of your kitchen, bathroom, bedroom or Home Office without spending a large amount of cash. It is a good idea to renovate all cabinet doors in a particular room in order to improve the look as well as its functionality. Measure the width and the height and mark all the corners of your door appropriately, using a straight edge such as a ruler or a piece of wood attach all four corners to make your cabinet door.
However the most common hinge to use and the one that I would advise you use for this project is the Full Overlay Concealed Hinge. This hinge traditionally has 3 adjustment screws allowing it to be fine-tuned ensuring your cupboard door is plumb.
Measure in 21.5mm from the edge of the door and this is where the centre of your cup hole will be – leaving 4mm from the edge to the door. For your full overlay hinge application the mounting plate should be 37mm in from the front edge of your cabinet side.
If you have purchased a clip on concealed hinge then you will need to simply line the hinge up with the mounting plate, and push it into place.
My role includes contributing to the company blog and managing the Eurofit Direct Facebook and Twitter pages. The original ones made it look dated and I’m glad you changed your mind about keeping them. I wish you had done this a year ago when my hubby was making doors for the front of our tub- we just ended up with plain boards rounded on the edges.
Can you just pop the old fronts off and reuse the rest of the drawer, or will you be building new drawers as well?
You will now have 2 measurements that will determine how much wood you will need, depending on how many doors you will be replacing.



Woodworking shops calgary jobs
Making a kitchen cutting board




Comments