I need energy and motivation video,alternative cures for cluster headaches,alternative medicine for fibromyalgia xyrem,simplex herpes symptoms quiz - Try Out

admin 06.08.2015

Australia’s oil shale resources can help deliver fuel security and the oil we use in our everyday lives. QER’s commitment to ensuring world's best practice in the development of new fuels from oil shale. QER's New Fuels Development Centre (NFDC) - communicating our project to the Australian community. Australia's oil shale deposits are vast, and offer a promising and realistic contribution to our country's current oil shortage, especially for transport fuels.
Creating new fuels can address Australia's declining oil self-sufficiency and provide greater fuel security for our country. Demand for transport fuels, and especially heavy transport such as trains and planes, is forecast to continue to grow for years to come. Energy density is an important element in fuels for heavy transport, which needs the higher levels of energy in carbon-based fuels to transport goods and people across long distances.
Fuel security is declining in Australia as we rely more and more on imported oil products and fuels to power our transport networks. Greenhouse emissions reduction is a major research challenge QER is conducting through its operation of the Paraho II™ technology demonstration plant. Heavy transport will require greater volumes of high quality fuels, such as the ultra-low sulphur diesel and jet fuels which QER is producing from oil shale. International Energy Agency forecasts predict world demand for oil to increase from 87 million barrels per day in 2010, to 99 million barrels per day by 2035. Just over a decade ago Australia was 100% self-sufficient in oil, but that has now dropped to around 50% and is forecast to fall further to just 18% by 2020.
Kerogen is a mixture of organic chemical compounds embedded within layers of oil shale that can be released through a process known as pyrolysis, which involves heating the shale to temperatures reaching 500ºC. Local community engagement is at the forefront of QER's activities, ensuring two-way communication where we openly provide information and take as much care to listen.
Mining the Stuart oil shale deposit at QER's New Fuels Development Centre is carried out by using a traditional open-cut method. New Fuels Development Centre – QER's facility near Gladstone in Queensland where we are demonstrating the Paraho II™ technology for processing oil shale.
Oil shale deposits consists of organic-rich rock, formed over millions of years from deposits of silt, algae and other plants and vegetation, and forms of animal life. QER is an integrated resource company demonstrating a world-leading technology for developing Australia's vast oil shale resources. Retorting is the name given to the process of heating solid oil shale rock to produce a synthetic crude oil which can be upgraded to create transport fuels.
Sustainable development is based on a recognition that the use of our resources must meet the needs of current generations without compromising or limiting opportunities for future generations.
Ultra-low sulphur diesel and aviation fuels produced at QER's New Fuels Development Centre are undergoing thorough engine testing regimes to highlight their suitability as a 'drop-in' replacement for conventional fuels. Visitors are welcome at QER's New Fuels Development Centre, with touch-screen technology and interesting exhibits on display at our on-site Visitor Centre.


Waste water produced at QER's technology demonstration plant undergoes stringent treatment processes to remove ammonia and hydrogen sulphide.
X-Ray machines, i-pods, clothing and medicines are just some of the many thousands of items which have oil as a basic ingredient. Yields from oil shales vary according to the grade of the deposit, but in some instances can be as high as 220 litres per ton of rock. Zealous attention to detail and a commitment to quality form the basis for QER's development of an oil shale industry in Queensland. Since 1972, Eric Kjelshus Energy Heating and Cooling has been helping Kansas City residents and businesses reduce their energy costs and increase home comfort through the installation of high quality insulation.
We are members of the National Association for the Remodeling Industry (NARI) and are certified through the Building Performance Institute (BPI). Insulation is made from a variety of materials, and it usually comes in four types: rolls and batts, loose-fill, rigid foam, and foam-in-place. Loose-fill insulation is usually made of fiberglass, rock wool, or cellulose in the form of loose fibers or fiber pellets. Rigid foam insulation is typically more expensive than rolls and batts or loose-fill insulation, but it is very effective in exterior wall sheathing, interior sheathing for basement walls, and special applications such as attic hatches. Foam-in-place insulation can be blown into walls, on attic surfaces, or under floors to insulate and reduce air leakage. Open-cell foam cells are not as dense and are filled with air, which gives the insulation a spongy texture. The type of insulation you should choose depends on how you will use it and on your budget. Consider factors such as your climate, home design, and budget when selecting insulation for your home.
Use higher R-value insulation, such as spray foam, on exterior walls and in cathedral ceilings to get more insulation with less thickness. Install attic air barriers such as wind baffles along the entire attic eave to help ensure proper airflow from the soffit to the attic. Be careful how close you place insulation next to a recessed light fixture—unless it is insulation contact (IC) rated—to avoid a fire hazard. Follow the manufacturer’s installation instructions, and wear the proper protective gear when installing insulation. One of the most cost-effective ways to make your home more comfortable year-round is to add insulation to your attic, including the attic trap or access door, which is relatively easy.
If your attic has enough insulation and proper air sealing, and your home still feels drafty and cold in the winter or too warm in the summer, chances are you need to add insulation to the exterior walls. In most climates, you will save money and energy when you build a new home or addition if you install a combination of cavity insulation and insulative sheathing. Consider products that provide both insulation and structural support, such as structural insulated panels (SIPs), and masonry products like insulating concrete forms. You should consider attic or roof radiant barriers (in hot climates), reflective insulation, and foundation insulation for new home construction.


About Eric Kjelshus Energy Heating and CoolingEric Kjelshus Energy Heating and Cooling has been providing air conditioning services in the Kansas City area since 1972.
Make your house (and wallet) happy with the KCP&L Home Performance Rebate with ENERGY STAR. You can earn rebates from KCP&L and federal tax credits for home improvements you may already be considering. Adding insulation in the areas shown here may be the best way to improve your home’s energy efficiency. Foam insulation R-values range from R-4 to R-6.5 per inch of thickness, which is up to 2 times greater than most other insulating materials of the same thickness. You can use the small pressurized cans of foam-in-place insulation to reduce air leakage in holes and cracks such as window and door frames, and electrical and plumbing penetrations.
While closed-cell foam has a greater R-value and provides stronger resistance against moisture and air leakage, the material is also much denser and is more expensive to install.
Ventilation helps with moisture control and reducing summer cooling bills, but don’t ventilate your attic if you have insulation on the underside of the roof. If it is less than R-30 (11 inches of fiberglass or rock wool or 8 inches of cellulose), you could probably benefit by adding more.
This is more expensive and usually requires a contractor, but it may be worth the cost—especially if you live in a very cold climate. Reduce exterior wall leaks by taping the joints of exterior sheathing and caulking and sealing exterior walls. Our commitment to quality and dedication to excellence in customer care has made Eric Kjelshus Energy Heating and Cooling the #1 heating and cooling services company in the Kansas City Metro Area.
The blown-in material conforms readily to odd-sized building cavities and attics with wires, ducts, and pipes, making it well suited for places where it is difficult to effectively install other types of insulation.
With closed-cell foam, the high-density cells are closed and filled with a gas that helps the foam expand to fill the spaces around it. Open-cell foam is lighter and less expensive but should not be used below ground level where it could absorb water. If you replace the exterior siding on your home, consider adding insulation at the same time. Cavity insulation can be installed at levels up to R-15 in a 2 inch x 4 inch wall and up to R-21 in a 2 inch x 6 inch wall. Closed-cell foam is the most effective, with an insulation value of around R-6.2 per inch of thickness. Consult a professional insulation installer to decide what type of insulation is best for you.



Interracial dating study
Energy bill nye worksheet 6th
Natural cure for herpes whitlow behandling
How can i have more energy when i wake up


Comments to «Natural cancer treatments that work trichotillomania»

  1. NapaleoN writes:
    During urination; muscle aches; and tender deal about transmitting genital herpes an infection.
  2. 2 writes:
    Ability to biochemically goal solely these which are helpful for yolk lecithin was used.
  3. VIP writes:
    Used to kill pathogens where taken for a protracted time period, is taken into car fridge to maintain her.