Earth magnetic rotation energy,national geographic weather station 331nc,rf shield aluminum blank - PDF 2016

Alien invasion has been the subject of great works of fiction since HG Wells published War of the Worlds in 1898.
Researchers have found that fear of attack by aliens tends to rise at times of heightened fear about more terrestrial threats. Believers cite increasing numbers of UFO sightings, the alleged crash of a disc at Roswell, New Mexico, in 1947 and several seemingly credible photographs and videos of strange craft in our skies as evidence that such a threat is increasing. Evidence: Photographs, videos, official releases that prove how governments around the world have monitored UFO activity for more than 50 years, stories by abductees and other claims by campaigners. Thousands of web forums and sites propose the belief that sometime in the early years of the 21st century, a previously undiscovered planet will collide with or pass very close to the Earth destroying civilisation or causing a massive planetary cataclysm. Some even suggest that Nibiru is a brown dwarf sister to our own sun and will first be seen towards the end of this year.
This is one of the few doomsday scenarios connected with the end of the Mayan calendar that may actually be based on science.
Evidence: There may be some correlation between the observed 11-year solar cycle and the time cycles seen in the Mayan calendar although this evidence is rather weak. They point to evidence of pole shifts in Earth’s past and claim that these reversals can be calculated by studying sunspots or magnetic field theory. Evidence: Work by scientists at Princeton University and Paul Sabatier University in Toulouse, France, indicates that Earth did rebalance itself 800 million years ago. Other scientists have also discovered that seasonal movements in both polar regions do effect the positioning of the poles.
While the apocalyptic visionaries believe such a switch could happen in a very short time scale, geologists think that it would happen over a period of one million years. The resulting build in pressure would mean that at some point a huge area of land would be devastated as the magma blasted skyward. Evidence: Most of the concern about 2012 and supervolanoes centres on the so-called super-caldera underneath Yellowstone Park in the United States. Satellite images have over the past few years shown changes in the the movement of molten rock 10 miles under the surface.
Nobody actually knows whether the caldera will blow or, if it does, when such an event could take place. Almost as soon as the Second World War in 1945 ended and with a standoff between the Western Allies and the Eastern bloc in place through the middle of Europe, there was rising anxiety that the world would be consumed by another epic conflict.
When Russia exploded its first atomic bomb just two years later, a nuclear arms race between East and West began.
The build-up of weapons continued throughout the 1970s and 1980s but a dedicated hotline between the Kremlin and the White House and some arms control treaties reduced the threat of an accidental nuclear war. Evidence: Today, the fears of a nuclear exchange centre on the rising power of China and the American response and the possibility of wars between India and Pakistan or North and South Korea escalating into global conflicts. Since September 11, 2001 and the deaths of nearly 3,000 people in New York and Washington DC there have been fears about al Qaeda or another terrorist network acquiring weapons of mass destruction and devastating a major western city or releasing a chemical or biological attack. Statements by governments about the risk of such an attack have done little to lessen the anxiety with both the British and American administrations raising the spectre of a stray nuclear weapon being detonated in a major city.
Dick Cheney, the former US vice president, is reported to have stated that he is haunted by thoughts of a mushroom cloud rising over an American downtown skyline.
But there is no evidence that al-Qaeda or anybody else holds nuclear weapons and several attempts by terrorists in the UK to make nerve or biological agents have proved inept failures. But peak oil theory centres around supply and demand and postulates that, at some point, demand will outstrip supply. Evidence: Peak oil is a near certainty but two questions remain: when will it happen and will the world have developed alternative sources of fuel in time? Optimistic observers do not believe that peak oil will occur before 2020 but admissions by some oil companies that they have overstated the reserves held underground have raised fears that we are at or may already have passed the peak. A decline in investment in new oil fields and plant during the global recession has only served to emphasise our total dependence upon a finite resource. More than a third of the commercial beehives in the US were lost to colony colapse disorder [CCD] in the winter of 2008.
Several causes of the disease have been suggested, including the almost universally present varroa mite, certain pesticides, Israeli acute paralysis virus, climate change and mobile phone broadcasts, but none have yet been proved to be the culprit. No cure has been found either, and as cases are reported in new countries the likelihood of a global pandemic leading to the extinction of the honeybee becomes a real possibility. There is, of course, no doubt that man’s impact upon his environment is getting worse although a large body of opinion believes that global warming is a liberal conspiracy and that the world has actually been cooling over the last decade.
A total environmental collapse brought about by runaway warming, toxic poisoning of the seas of parts of the inhabited areas of the world or a tipping point with some of the most crucial species (see Bee colony collapse above) would have a huge impact upon civilisation and could render parts of the world near uninhabitable.
Evidence: Few scientists dispute that the global average temperature has been rising for at least a century.
The Government’s chief scientific adviser Prof John Beddington has insisted that uncertainty about some aspects of climate science should not be used as an excuse for inaction. The Telegraph, like the BBC, isn’t there to give us the news—it’s there to reassure us that everything is alright and our Illustrious Leader.. Mechanisms of origination and social influence of extremely low frequency Eartha€™s electric fields of conservative type and very low frequency spinning electric fields of vortical type are considered in the article. Unlike well-known technical rotating fields, spinning electric fields of natural origination can be considered as a new class of phenomena. Eartha€™s currents, electromagnetic radiation of Van-Allen belts and natural cavity resonators predetermined EMF spectrum in which everything living evolved. In particular, electrical activity of human brain is related to extremely low frequency (ELF) Schumann waves, extracted by the closed, 40000 km, Earth-ionosphere resonator. On the other hand, same resonator has another, a short-range mode, extracted between Eartha€™s surface and a floor of the ionosphere, 50-80km above. The profound impact of Eartha€™s magnetic fields on living organisms is fundamentally considered in [1]. Unlike vortical magnetic fields, influence of Eartha€™s conservative electric fields is less studied, partially because of difficulties of overcoming artifacts associated with electric fields produced by an operator (simple grounding the operatora€™s body doesna€™t eliminate the problem completely and isna€™t acceptable sometimes).
However, Eartha€™s own fields can produce even more drastic results than localized industrial fields, because they cover extremely vast areas of human habiting. A simple comparison of Fig.1 and the table above reveals matching the frequency band in the table with the originated ELF spectrum induced by turbulent water. The comparison underlines the social importance of the problem: natural sources can produce ELF fields which dangerously match in spectrum that of human organisms while being more powerful. Naturally-originated alternating electric charges cover vast areas, producing great integrative contribution in originated alternating field in every point. The conservative Eartha€™s fields can induce such the under-crania electric potentials, which drastically exceed that of the brain. Parametric oscillations manifest themselves through so-called secondary sources: surface electric charges, which origin on a border between two medias in a primary field of some source. For the Nature, electrophysical properties of the media can be shown as a complex dielectric permittivityi??.A  Generally, i??. Considering a social aspect of this type of oscillations, we have to note that existence of pathogenic zones is related to presence of subterranean waters.
Another example: a flow of subterranean water comprises the bubbles, which collapse pretty frequently, generating even higher frequencies, which correspond to theta waves, 4-8 Hz, associated with drowsiness, hypnosis, lucid dreaming and light sleep. Virtually, each disease has its own EEG-pattern, which sometimes is seen on EEG-record even before the clinical symptoms appear [9]. VLF-action of the Natural EMF is related to phenomenon of a spinning electric vector, SEV [6-8].
The SEV is formed by superposition of two AC fields, extracted by a natural resonator within VLF band, and then gained a phase shift j.
A A  Fig.1 shows the resonant VLF-band at 6kHz, a whata€™s more, the frequency of its maximum can vary depending on condition of the ionosphere.
SEV is a material object, having angular momentum, and, therefore, it can be defined as a virtual gyroscope [8]. N.A Kozyrev, prominent Soviet astrophysicist (1908-1983), has shown gravity reduction effects in his experiments with mechanical gyroscopes, which was confirmed by other researchers. The author has developed special means to study both Eartha€™s and industrial EMF fields [10]. For studying spinning fields, SEV, another instrument was developed: Spinning Electric Vector Analyzer, SEVA.
The experiments with both the instruments revealed both industrial fields and Eartha€™s fields. The experiments with ELF-meter revealed strong correlation between weather and ELF-portion of the spectrum: impending clouds, their electric charges, drive heavy activity in this portion of the spectrum, as much as 10 times.
Scanning country landscape with ELF-instrument also revealed some spots of the elevated subterranean activity as possible indicators of turbulent water streams.
Special experiments were conducted with the motion conversion: the ELF-meter in the moving car registered electric-pulse activity as the car was driven along the road with regular planted trees aside. Also, the meter displays heavy ELF-activity around moving human being and especially inside an active crowd.
The considered above conservative ELF and vortical VLF fields are related to a social factor.
Unlike ELF electric fields, action of natural VLF spinning fields is based on more subtle mechanism of space-time distortions. For the Nature, electrophysical properties of the media can be shown as a complex dielectric permittivity .A  Generally, . The (e,2e) spectrometer vacuum chamber (figure 1) is manufactured from 304 grade stainless steel, the construction being carried out by Vacuum Generators using a design of Jones, Read and Cvejanovic, full details of which may be found in T. 3mm thick mu-metal magnetic shielding is placed both internally and externally to decrease extraneous external magnetic fields to less than 5mG at the interaction region. All inputs and outputs to the spectrometer pass through the vacuum chamber via feedthroughs on the top flange.
The top flange of the vacuum system is a 25mm stainless steel flange with 11 conflat CF70 flanges arranged around a central 200mm flange designed for locating a hydrogen source.
Two flanges are used for the high voltage channeltron and photomultiplier tube inputs and pulse outputs. Three rotary motion feedthroughs allow the analysers and electron gun angles to be changed externally via stepper motors for both analysers and for the electron gun.
The ionisation gauge is placed at right angles to the main flange to prevent light from the thoriated iridium filament entering the vacuum system, which would increase noise on the photomultiplier tube. The ionisation gauge feedthrough is sooted, and a loose cover is placed over the entrance in the chamber flange to prevent stray light from the ion gauge entering the vacuum system.
The target gas enters the system via a CF70 flange which has two 6mm stainless steel tubes welded into the flange. The other gas feed is connected to a hypodermic needle set at 90A° to the incident beam for measurements in other geometries.
The gas jet which is not currently used in the interaction region can be used to non-locally fill the chamber with gas for background counting measurements.
The final CF70 flange is used when the photomultiplier tube is cooled, usually during baking of the system following exposure to atmosphere. The tube is cooled by passing vapour from a liquid nitrogen source through expansion coils wrapped around the photomultiplier tube housing. The electron gun is a two stage non-selected gun designed by Woolf (Ph.D thesis, University of Manchester) (see figure 3). The gun consists of a filament, grid and anode source which is focussed using a triple aperture lens through two 1mm defining apertures in the centre of the gun.
The apertures define the electron beam pencil and beam angles, and are focussed onto the interaction region using a second triple aperture lens located between the apertures and interaction region.
The electron gun is shielded using advance (constantin) sheet which is grounded to the body of the gun mounting. The gun is mounted onto an x-y translation table to allow placement of the electron beam as accurately as possible to the centre of rotation of the analysers and electron gun rotation axis.
The gas jet is mounted from the electron gun using a narrow support of 310 stainless steel, and the Faraday cup can be attached to this support. The original unselected electron gun built by Woolf was completely rewired and a custom built PTFE 25 way inline wire-wrap plug and socket was placed between the 52 way vacuum electrical feedthrough and the electron gun.
The wiring from the 52 way feedthrough to the inline plug is shielded colour coded 30 awg PTFE coated advance wire, and the inline plug and socket connectors are non-magnetic gold plated wire wrap pins. The electron analysers are constructed from molybdenum and are mounted from two rotating gear plates controlled externally via the rotation feedthroughs on the top flange (see figure 2). The input electrostatic lenses for each analyser are three element cylindrical lenses as shown in figure 4. The interaction region is focussed onto the entrance aperture of the hemispherical energy analysers with a beam angle of around zero degrees, the image of the analyser entrance aperture being larger than the size of the interaction region.
Field gradients around the input and exit apertures are corrected using standard Jost correctors. The energy selected electrons passing through the exit apertures are finally collected by Mullard X919BL channel electron multipliers which amplify the single electron to produce a current pulse at their output.
A principle source of noise on the signal pulses arises from the turbo-molecular pump motor. The noise from the turbo pump is reduced to ~ 5mV using these techniques, and as the average pulse height from the saturated multiplier is around 20-40 mV, this allows adequate discrimination following amplification.
The pre-amplifiers located external to the vacuum system are commercial 100X preamplifiers with 400pS rise-times, manufactured by Phillips Scientific. The NIM signals produced by the discriminators drive two ORTEC 437 Time to Amplitude Converter's via appropriate delay cables and an ORTEC pulse delay unit. The main TAC output feeds an ORTEC Multichannel Analyser card located in the PC controlling the experiment, whereas the second monitor TAC drives an external MCA, allowing convenient monitoring of the coincidence signal as the experiment progresses. The high voltage supplies to the electron multipliers are two Brandenberg 5kV supplies controlled by the main PC via serial DAC's. Principally the filter is used to reduce pickup noise from entering via the HT cable onto the multiplier output.
Secondly, the filter has a slow response time for high voltage spikes, and reduces the probability of damage to the pulse electronics should the EHT supply suddenly turn on or off. Capacitor C2 decouples the 1kW load resistor to earth for high frequency pulses from the CEM's, and the voltage appearing across this load is connected via the capacitor C3 to the input of the 6954 preamplifier. Since the input impedance of the preamplifier is 50W and the CEM is effectively an ideal constant current supply, most of the current passes through to the preamplifier.
Finally, the 10M resistor prevents the output to the preamp from rising above ground when the preamp is disconnected from the circuit and is therefore a safety device for the preamplifier when initially connected. The original design placed the atomic beam nozzle and Faraday cup on the same support structure fixed to the body of the electron gun, with the atomic beam direction being in the detection plane when the perpendicular plane geometry is chosen (see figure 2). A second configuration is adopted for exclusively perpendicular plane coincidence experiments, the atomic beam nozzle being oriented at an angle of 45A° to the detection plane so that the gas effusing from the nozzle does not fill the analysers when they oppose the nozzle (see figure 6).
In this configuration the support strut for the atomic beam nozzle is terminated lower than the detection plane, as is the nozzle itself. For non-perpendicular plane measurements the Faraday cup is once mounted from the support strut and the gas effuses perpendicular to the electron beam direction.
One difficulty when aligning an (e,2e) coincidence experiment lies in the focussing the incident electron beam and analysers onto the interaction region.

The throughput of electron current as detected by the Faraday cup is insensitive to both position and focusing of the electron beam, since the cup opening is usually made quite large (in this case 6 - 10mm) and the bias voltage applied to the cup to prevent electrons returning to the interaction region allows all electron trajectories within this opening to be detected.
Conventionally, following maximisation of the Faraday cup current, the beam is steered and focussed onto the gas jet as detected by counts in the analysers.
This has the disadvantage that the overlap volume is maximised for both atomic and electron beam density, which tends to place the interaction volume as close as possible to the output of the atomic beam nozzle, which is almost certainly not in the centre of the detection plane.
To eliminate the need for time consuming iterative techniques and the associated errors due to detection geometry, a separate method for tuning the electron gun is adopted that does not depend upon the analysers. The interaction between the target and the electron beam not only produces ionisation, but the valence states of the target also are excited with various probabilities depending upon the incident energy of the electron beam. These photons are detected by the photomultiplier tube, by placing a 450nm A± 50nm optical filter in front of the photocathode. The interaction region is therefore defined where an aperture in front of the photocathode is focused by the lens.
The plano-convex focussing glass lens is covered by a grounded fine tungsten mesh to eliminate surface charging. The photomultiplier tube may be cooled by circulating nitrogen gas boiled off LN2 through copper coils encircling the photomultiplier tube housing.
The photomultiplier tube used in the experiment is a 9789QB EMI photomultiplier tube with a bi-alkali photocathode peaking in the blue region of the optical spectrum.
As with the electron multiplier circuitry, it is important to optimise the load of the photomultiplier tube so that reflections along the feeder line to the counting electronics are minimised. The 1nF 6kV capacitors across the dynodes close to the output stage are used as charge storage pumps that quickly refurbish the surface charge on the dynodes, allowing increased counting rates.
The dynode resistors are 1% tolerance metal film resistors as these are more stable with temperature. The EHT supply to the photomultiplier tube is a Brandenberg 2kV supply operating at 1500V for this tube.
The negative going output pulses from the tube measure typically 200-500mV in height, and therefore are able to directly drive an ORTEC 473A constant fraction discriminator located in one of the NIM crates. All resistors and capacitors for the dynode chain are soldered to the photomultiplier tube base internal to the vacuum system, using standard 5-core solder. Typical pulse heights from the electron multipliers in saturation mode are 25-40mV, whereas the typical height of the photomultiplier tube pulses is of the order of 250mV. The electron multiplier pulses are obtained from the multiplier supply circuitry as explained above. The amplified pulses from the 6954 amplifiers pass along doubly shielded RG-58 cable to the input of the ORTEC 473A discriminators.
The two analyser discriminators are located in separate NIM crates to increase isolation and reduce common mode pickup. The slow rise-time positive outputs from the 473A discriminators pass to three ORTEC 441 rate-meters which allow counting and monitoring of the pulses. The fast NIM pulses from the analyser 473A CFD's pass through appropriate delay lines to two 437 TAC's. This second multichannel analyser allows the operator to monitor the total accumulated coincidence signal during operation. The lens supplies that control the voltages impressed onto the lens elements and deflectors in the experiment were developed over a number of years, and therefore take different forms. Three of these supplies feed the deflectors in the electron gun, the other two supply the input deflectors in the analysers. In a second 19" crate is located the gun lens high voltage supplies together with the high voltage supplies for the Faraday cup. In a third 19" crate is located the analyser voltage supplies together with a set of serial loading supplies that control the electron multiplier EHT supplies.
A further supply controls the current boost circuitry located in the filament constant current supply unit (see below). The outputs of each computer controlled supply that drives an individual lens element or deflector are connected to a 70 relay switching board. The Digital voltmeter is in turn accessed via an IEEE-488 interface which is addressed by an 8086 slave PC which converses with the central PC which controls the experiment.
The outputs from the relay board connect to the spectrometer via shielded multicore cables which take the gun voltages to the 52 way feedthrough and the analyser voltages to the two 19 way feedthroughs located on the vacuum flange.
The gun supply multicore also carries the filament supply current to the 52 way feedthrough.
The Faraday cup current is measured by the Keithley Digital voltmeter when under computer control but this can also be measured by an external pico-ammeter.
In addition to the analyser electrostatic lens and deflector voltage connections, the 19 way CF70 feedthroughs are used to control signals from internal sensing opto-isolators which control the stepper motor interlocks. The stepper motors that drive the analysers and electron gun around the detection plane are five phase motors with integral 10X reduction gearboxes driving the rotary motion feedthroughs. The intelligent stepper motor drivers are addressed via a serial port located on the controlling PC bus. An additional interference problem was traced to the RS232 serial line from the controlling PC.
The PC bus was found to be poorly earthed due to very little copper being used for the bus earth.
This was cured by decoupling the 0V RS232 line from the main 0V line for the stepper motors, as is shown in figure 10. The analyser stepper motor supplies have a facility for halting the motors using limit switches which are optically coupled to the internal 68000 logic circuits driving the supplies. The SD5443-3 phototransistor normally illuminated by the TEMT88PD photodiode during operation ensured a fail-safe mechanism should any of these components fail (this automatically prevent the motors from running).
Should the analysers move into a position as defined by the four criteria (a) - (d) above, a shutter located on the analyser turntables moves between the appropriate photodiode and phototransistor, shutting off the light and thereby shutting down the stepper motor current. Only motion in the opposite direction is allowed by controlling logic, allowing the analyser to move away from the point of imminent collision but no closer.
The six pairs of optocouplers that prevent the analysers moving into the Faraday cup, electron gun and gas jet support are located on the mounting struts supporting the main body of the spectrometer. Two optocouplers are located on the side of analyser 2, and two shutters are located on the sides of analyser 1 to prevent the analysers colliding with each other.
Finally a ninth optocoupler is located over the electron gun counterweight which monitors when the gun is at an angle less than 65A°, where the sweep angle around the detection plane is reduced. The current boost circuit operates from a serial driven supply card as detailed previously. The main filament drive is through six power diodes that feed the current from the constant current supply to the filament. The Darlington transistor T1 feeds additional current to the filament via three parallel 10 turn 100W trim resistors through a 1N4007 diode.
As the constant current supply acts as an infinite resistance source, the boost circuit supplies additional current only when the voltage at the anode of the feed 1N4007 exceeds the output voltage of the constant current supply. Finally, the filament bias voltage (and hence energy of the electrons) is set to the midpoint of the filament by two 100W balancing resistors located across the terminals. In addition to the ADC buffer card, three independent isolated regulated supplies drive REF01 voltage reference sources for measurement of the positions of 10 turn potentiometers located on the analyser and electron gun rotary drive shafts.
The angular position of the electron gun and analysers is calibrated when the system is opened using visible laser diodes that define these angles to an accuracy of A±0.2A°.
Figure 13 shows an overall block diagram detailing the computer control and high speed pulse interfacing to the spectrometer. A simple experiment to demonstrate the effect of the Suna€™s Polar reversal in 2012 is to attach a string to one side of a rotating gyroscope and spin it around your head.A  After the gyroscope is rotating steadily around your head twist the string between your fingers. The Earth will be particularly susceptible to this torsional force from the gravitational field of the Sun in 2012.A  The strength of the magnetic field around the earth has been waning for several thousand years and the ability of the Earth to sustain its polar orientation has been weakening proportionately.
In the first type of polar reversal that may occur in 2012, the effects on the environment would be serious, but manageable.A  The ocean currents would reverse, ice-caps melt, and winds and precipitation levels alter drastically. The stability of the Eartha€™s rotation is especially vulnerable since it already spins at an angle of over twenty-three degrees off centre, and has a lopsided distribution of weight across its surface. The Earth is also subjected to gravitational influences from its neighbours the Moon and planets such as Venus, Mercury and Mars. The mass of the Black Hole at the centre of the Milky Way Galaxy is in the order of 105 and 1010 solar masses.A  These are known as super-massive Black Holes and lie at the centre of most galaxies.
As the stars move around their galactic orbit they travel in a sinusoidal motion, crossing the plane of the ecliptic, where the gravitation influence of the super-massive Black Hole is strongest, when the y-axis of sinusoidal curve reaches zero. The Sun entered into Cycle 24 in 2008.A  It will reach its zenith in 2012 which will signal significant Sun Spot activity and massive solar flares.
The accumulation of all these forces in 2012 will dramatically increase the probability of polar reversal on Earth, which may be accompanied by the complete north-south rotation of the entire planet. Why ancient civilisations understood and were able to predict devastation and its consequences starting in 2012 is unknown.A  Whether it was their mathematical and astronomical knowledge combined with their Remote Visioning ability, Telepathic powers, Clairvoyance, sensitivity to Earth Energies etc. The Egyptian and Mayan pyramids function in this way and so do the Megalithic monuments of the Neolithic period. Le Menhir de Champ-Dolent, photographed by Gilbert Le Cossec using the Epiphanie technique.A  The 10 meter granite menhir builds up resonant electromagnetic energy then releases it up into the magnetosphere. NASA scientists have discovered additional evidence that Mars once underwent plate tectonics, slow movement of the planet's crust, like the present-day Earth. This high resolution magnetic field map, the first of its kind, covers the entire surface of Mars. Images above: The Mars Global Surveyor spacecraft measures the direction and strength of the magnetic field as it passes over the Mars crust. Image above: The global map below is built up from many thousands of orbits at constant altitude (mapping orbit), and uses colors to represent the strength and direction of the field caused by crustal magnetization. To see this characteristic magnetic imprint on Mars indicates that it, too, had regions where new crust came up from the mantle and spread out across the surface. Connerney points out that plate tectonics provides a unifying framework to explain several Martian features.
Fear of such an attack such as from Mars, a species from outside our galaxy or beings from other dimensions, ebbs and flows with the general state of anxiety on Earth.
But do any of these suggest that we’re about to be taken over by a race of grey humanoids with large black eyes at any time in the future, let alone in 2012? According to Sitchin, Nibiru is a planet in our solar system which follows an erratic orbit bringing it into the inner system every 3,700 years. Some point to the 2005 announcement by NASA that a 10th planet had been discovered on the outer fringes of our solar system and many think that it will pass close to the Earth in 2012. In this scenario a vast solar flare or expulsion of gases from the sun in December 2012 will engulf the Earth wreaking havoc upon mankind and the planet’s ecosystems.
But whilst a solar flare from the sun could cause problems such as satellite damage and injury to unprotected astronauts and blackouts, the flare itself would not be powerful enough to destroy Earth, certainly not in 2012. Many believe the Mayans and the ancient Egyptians discovered evidence of pole reversal events in the future and that the secrets have been covered up by today’s governments. They studied magnetic minerals in sedimentary rocks in Norway and found that the north pole shifted by more than 50 degrees (a quarter the distance from pole to pole, in effect) in under 20 million years. Researchers believe this will happen when magma rose into the Earth’s crust but would be unable to break through.
Such an event would, campaigners say, blast millions of tons of debris and poisonous gases into the atmosphere, and could either plunge the world into a so-called nuclear winter triggering an ice age or, at worst, wipe out life in parts or all of the planet. The invention of hydrogen (thermonuclear) devices only accelerated the race which peaked in 1962 during the Cuban Missile Crisis when the world came closest to an all-out nuclear exchange between the United States and the Soviet Union. Demand for oil outstripping supply would have huge consequences around the world given that most economies are powered by oil, agriculture is completely dependent upon it for fertilisers and pesticides and the plastics industry is based on oil extraction. King Hubbert created the theory behind peak oil in 1956 to accurately predict that United States oil production would peak between 1965 and 1970. The syndrome, in which all of the worker bees in a colony die off suddenly, leaving nothing but a solitary queen wandering alone on empty frames, has spread to several countries in Europe already including France, Belgium, Italy, Portugal and Spain. In previous decades pollution, soil depletion, the destruction of the ozone layer and an imminent ice age were the ecological catastrophes that faced us. The world is however, attempting to combat this with key summits in Copenhagen, Denmark last December, and Cancun, Mexico, this month seeking to reduce greenhouse gas emissions. This is despite rows over an Intergovernmental Panel on Climate Change (IPCC) report into rising temperatures and another controversy surrounding the science behind climate change, dubbed “Climategate”, when leaked e-mails appeared to suggest that scientists at the University of East Anglia had manipulated climate change data.
NASA scientists have reported that the past decade was the warmest on record, proving that global warming had continued “unabated”. It actually tells us more about the UK Telegraph newspaper, its editorial integrity and agenda, than it does about the end-of-the-world. Ita€™s shown that the first category (conservative fields) of natural fields overlaps the spectrum of own frequencies of human organism and can disturb pace of organism.
It supports very low frequencies, VLF, 3-30kHz.A  Quantitative difference between both modes brings to their different qualitative action on mankind.
The blue lower line shows the original not-disturbed spectrum, while the bright upper line is a result of influence of turbulent water. In particular, the spectrum of Eartha€™s fields overlaps that of electroencephalography (EEG). Its action is based on originating a vortical electric field, which has low amplitude at such the low frequencies. Beside that, the motion forms an alternating magnetic field, which, however, can be ignored at relatively low speeds of our everyday life.A  Physiological action of the formed electric fields considerably depends on speed.
The instrument comprises a quadrupole sensor with two pairs of mutually orthogonal plates, connected to two parallel channels of band-pass filters having VLF center frequency.
This can explain change for the worse of human physiological sensation during changing weather: brain and other organs waves entrainment takes place.
The motion converted patterns of electric fields around the trees into periodic pulsed of theta-wave spectrum, as was discussed above. In cities, harmonics of industrial frequency furnish conditions for developing spinning fields. It has to be said, that this activity depends on a season, time of a day, weather and other factors.
Fig.3 shows an oscilloscope image of SEV originated at the corner of the metal box in a room. Field rotation possesses gyroscopic properties, which in-turn, can influence space-time reality, as this showed N.A.
One of these is internally connected to a gas jet which can be set at 45A° to the incident electron beam and is used in the perpendicular plane experiments. These stainless steel feeder tubes are connected to the nozzle using grounded shielded PTFE hose.
One follows the anode, another corrects the beam direction between the apertures and a third steers the beam onto the interaction region. This shield is coated with aerodag colloidal graphite to reduce patch fields on the surface of the metal, and is made as small as possible to allow the analysers to approach the gun as close as is feasible when non-perpendicular plane geometries are selected (see figure 2). The XY translation table is mounted from the rotating yoke, to which is attached the photomultiplier tube. This allows the gun to be dismounted from the system without the need for rewiring of the feedthrough when the need arises (filament changes, cleaning etc).

The wiring between the gun and inline socket is also shielded colour coded PTFE coated advance wire facilitating spot welding to the electrostatic lens elements of the gun. The analysers are mounted onto x-z translation tables that allow them to view the interaction region accurately over the full range of angles accessible. These lenses have a capability for energy zooming of around 10 : 1, and have a maximum entrance acceptance angle of A±3A° as defined by the entrance apertures. This ensures that the overlap volume accepted by each analyser encompasses the interaction volume for all detection angles as the analysers move in the detection plane. These devices use an activated lead glass internal surface which has a high coefficient of secondary electron emission when a high voltage (around 3000V) is applied across the multiplier.
This noise may be picked up by the channel electron multiplier and the high voltage feed to the multiplier, and is generated internally in the vacuum system. The CFD's are operated in NaI mode as this has a 2ms dead time following the initial pulse, thus reducing the possibility of false triggering due to any mismatching impedance reflections along the delay cable. These EHT supplies are connected via VERO 200 high voltage couplings to high voltage cable connecting to the pickoff circuitry located on the high voltage feedthroughs. This allowed the analysers to roam the detection plane over a complete 360A° angular range. The configuration of the target source hypodermic when perpendicular plane measurements are conducted.
The common procedure is to initially maximise the current from the gun onto the Faraday cup, then onto analyser counts as the electron beam is moved through the gas jet.
Maximising the Faraday cup current is therefore only a crude preliminary alignment of the incident electron gun beam. This therefore assumes that the analysers are initially focused onto the interaction region, and a slow iterative technique must be adopted where the analysers and electron gun are tuned so as to maximise the signal from both analysers. In this case a true differential cross section is not obtained, since the scattered and ejected electron trajectories lie in a different plane than defined in the initial experimental alignment.
An EMI 9789QB reduced photocathode photomultiplier tube is installed in the vacuum system together with optical focussing and defining elements (figure 2). A group of these excited states decay back to lower valence states with the emission of visible photons at wavelengths around 450nm for both helium and argon targets. Tuning of the electron gun to PMT counts therefore guarantees that the electron gun is steered and focussed to the point at the centre of the detection plane independent of the analysers or gas beam density.
This is mainly used when the vacuum system is baked at temperatures above 55A°C, since the photocathode is rapidly damaged by temperatures exceeding this. The tube is a venetian blind dynode construction, and has a reduced photocathode to decrease the noise on the output of the tube to less than 20Hz. The photomultiplier tube base was thoroughly cleaned in an ultrasound following location of these components, to displace any flux residue from the solder joints. It is therefore necessary to amplify the channeltron pulses prior to transmission to the discriminators, whereas the photomultiplier tube pulses are sufficiently large to not require further amplification. These pulses are amplified by Phillips Scientific 6954 100X amplifiers located external to the EHT feedthroughs connected by 10cm lengths of RG-58 cable. These crates are further decoupled from the AC mains supply using filter circuitry on each supply line. Internal to these rate-meters buffer 7400 TTL chips have been added to send to 32 bit counters located in the main PC via RG-58 cable.
These supplies are fully floating, their mid-point voltage being equal to the lens element voltage in which the deflectors are housed. All these supplies are fully computer controlled isolated units with low output impedance to reduce noise and eliminate current loops. This relay switching unit allows either the voltage or the current on each lens element to be measured by a Keithley Digital voltmeter. This drive is further reduced internally by 10X reduction gears, resulting in a reduction ratio of 100:1. This led to the ground line of the RS232 serial line moving around with respect to the 0V stepper motor reference as drive current to the motors returned along the ground line. The optocoupler logic circuit circuit that controls the stepper motors and avoids collisions between the analysers, the electron gun, the Faraday cup and the hypodermic support.
Added to this filament supply is a computer controlled current boost circuit that can be used to increase the filament current during electron gun tuning. The additional current then returns to the 12V DC regulated supply via a second 1N4007 diode. This therefore depends upon both the current driving the filament, as well as the resistance of the filament when hot (typically 4W - 6W). This supply feeds current to the filament without changing the characteristics of the main constant current supply used while operating the spectrometer. These high stability reference sources ensure that the analyser and electron gun positions are accurately measured with time. A datalogger internal to the controlling PC establishes a cubic spline relationship between the measured angles and the corresponding ADC conversion from the potentiometers. This PC also controls the selection of the relay motherboard for measurement of the required lens element either in voltage or current mode when a request is sent from the controlling computer via an RS232 serial line. A The torsional force of the twisted string will be transmitted along its length and will persuade the gyroscope to twist as well.A  In simple terms this is the same effect that reversing the magnetic Poles of the Sun will have on the polar orientation of the Earth.
The concentration of weight lies mostly along the major land masses of the Americas, Europe and Africa. It will cross in the year 2012.A  At this point the gravitational influence of the super-massive Black Hole will be at its maximum. A As the Moon, planets and the Earth orbit around the sun huge amounts of energy is transferred from these stone structures into the magnetosphere. Stripes form whenever two plates are being pushed apart by molten rock coming up from the mantle, such as along the Mid-Atlantic Ridge. In the far future, when the sun runs out of fuel, most scientists accept that it will swell into a red giant and engulf the Earth. After the arrest of 12 men around Britain on Monday, Metropolitan Police Assistant Commissioner John Yates, the country’s most senior counter-terrorism officer, said the raids had been “absolutely necessary” to keep the public safe. Some believe that it already has while others think that it is likely to happen some time between now and 2020. A collapse in social order following a peak in oil production is, therefore, something to be taken seriously. The theory has successfully predicted the decline from oil fields and regions subsequently. If they became extinct severe shortages, starvation, violence and riots would surely follow. After two weeks of tense negotiations, the United Nations finally agreed on a way forward to keep global temperature rise below 2C (3.6F). The originated field, in turn, causes passing electric current (so called eddy current) through the cells, disturbing their normal functioning. Indeed, a brain is a heterogeneous structure, where conductive areas alternate with non-conductive gaps. Shpilaman cause heavy SEV, and what is more, there is a spinning electric process remaining for hours after turning off the axion generators. The next stages of the instrument measure a phase shift between the signal at output of the channels, their amplitude and then calculate spinning S. The sporadic character of the train of pulses matches turbulent flowing subterranean water.
The experiments with the digital spectrum analyzer, Fig.1, have revealed seasonable variation of the VLF 6kHz ionosphere resonance, which partially explains these facts. Spinning Electric Field As a Virtual Gyroscope: On Possibility of Existence of Kozyreva€™s Effect in Spinning Fields.
The spectrometer is shown configured in the perpendicular plane, the electron gun being placed in the vertical position with respect to the analysers which span the horizontal detection plane.
The electron source is a heated tungsten hairpin filament heated by passing around 2A of DC current through the filament. The saturated gain of these devices yields around 1E8 electrons in the output current pulse for a single electron which enters the input cone. This allows the analyser to roam over a complete 360 degrees of the detection plane when in this geometry (apart from the position where the analysers would clash wth each other).
The analysers are then adjusted for maximum signal count and the procedure is iterated until a maximum is found.
The dark noise count is also reduced when cooled, however since the reduced cathode PMT only produces dark counts of less than 20Hz at room temperature, this is not necessary during routine operations. The 1.82M resistor was chosen to optimise the single photon counting efficiency of the tube. It is not found that these solder connections significantly affect the ultimate vacuum pressure in the system. Isolated DC supplies to these amplifiers is obtained from a standard +15V supply, the circuit diagram being given in figure 8.
The power supply to these TTL buffers is derived from the rate-meter supplies via 7805 5V regulators located internally. This supply boosts the current without changing the main supply, thus ensuring supply stability before and after the electron gun is tuned. On the other side of the Earth is the Pacific Ocean, which is Eartha€™s greatest water mass and much less dense. A Megalithic monuments found across Europe show surprising awareness of these 2012 phenomena. To be precise, spiral amplification, as the molecular structure of quartz within the stones is spiral.
Kletetschka of the Catholic University of America, Washington, DC, and Goddard Space Flight Center; Dr.
But rather than happening in 2012, this event will happen no sooner than five billion years from now. David Cameron expressed his satisfaction at the climate change package that will see the rich world committed to forking out billions of pounds every year to stop global warming, but delay plans to cut carbon emissions.
Therefore, a local field in the physiological gaps can drastically exceed the external electric field. Geo-faults, natural heterogeneities, corners and other factors can stimulate origination of SEV. Fig.1, representing the experimental data of the author, shows obvious 6 kHz- resonance in Eartha€™s cavity resonator formed by Eartha€™s surface and floor of ionosphere.
The axion field-SEV-relation experiments, conducted by the author in November 2006 revealed the phenomenon of remaining rotation of SEV after switching off the axion generator. Sources Of Bio-Active Radiation Collection (in Russian), Moscow Science-and-Engineering Association Of Radio Engineering, Electronics and Communication, 2006, pp.9-25. The electron gun is a two stage non-energy selected gun that produces an incident electron beam current of up to 4 microamps at an incident energy from around 30eV to 300eV.
The 470k resistors bias the dynodes to achieve saturation of the current pulse at the output of the tube, hence biasing the tube for single photon counting applications. This was found to be necessary to eliminate problems associated with current loops from the 20A peak motor current feeding the common point of the logic circuitry. With a gauss meter one can measure how single Menhirs are polarised in relation to the ground around them.
More importantly, the new map shows evidence of features, transform faults, that are a "tell-tale" of plate tectonics on Earth." Each stripe represents a magnetic field pointed in one directionA­positive or negativeA­and the alternating stripes indicate a "flipping" of the direction of the magnetic field from one stripe to another. To study this phenomenon, spinning electric vector analyzer, SEVA, was developed by the author. Therefore, big groups of people can be exposed to brain waves entrainment factors, which can influence their health and social behavior. The analysers are identical, and consist of a 3-element electrostatic lens focussing the interaction region onto the entrance of a hemispherical electrostatic energy analyser. The Anode deflector pair corrects for any misalignment of the filament emission point with respect to the axis of the electron gun. In stone circles they are polarised in relation to each other, two to three times the normal values.
Apolinario Chile Pixtun said he was tired of being bombarded with frantic questions about the end of the world. The Chamber is lined internally with 3mm thick mu-metal, and a mu-metal cylinder encloses the chamber externally as shown. The electrons selected in angle and energy are amplified using Mullard 919BL channel electron multipliers. The defining apertures limit the pencil and beam angles of the electron beam following focussing by lens 2 onto the interaction region. The load is set by the 50W resistor across the anode to the HT feed, the pulse being decoupled to ground via the 1nF capacitor.
To augment the amplification, stones were placed at points where two or more underground streams crossed. This reduces the magnetic field at the interaction region to less than 5mG, an acceptable level for the electron energies used in this experiment. The interaction region defined by the interaction of the gas target beam and the electron beam is focussed onto the photocathode of an EMI 9789QB photomultiplier tube via a lens, 450nmA±50nm optical filter and defining aperture.
Placement of the apertures ensures that the beam angle is close to zero degrees at the interaction region over a wide range of energies, whereas the aperture opening reduces the pencil angle to around A±2 degrees over this energy range.
Water moving through an underground tunnel creates an electric charge and is stronger where two streams cross. The target gas effuses from a 0.6mm ID hypodermic needle constructed from platinum iridium alloy. The 10MW safety resistor prevents the output charging up to a high voltage if the feed is disconnected.
The deflectors between the apertures correct for space and surface charge beam variations inside the field free region, whereas the final deflectors allow the beam to be steered onto the interaction region defined by focussing a 1mm aperture in front of the photomultiplier tube onto the gas target beam. So, even though the forces exerted by each stone and stone circle are small, placing many thousands of them across the whole of Europe over thousands of years strengthens the Eartha€™s magnetic field, which has been steadily weakening over thousands of years. The electrons passing through the interaction region which are not scattered are collected in a Faraday cup opposite the electron gun. Potentially this stabilisation effect can help the Earth weather out periods of instability like the one we will experience in 2012.A  It is important for mankind to not only maintain the stone architecture of the ancients, they must follow in their footsteps, understand their science, then build more structures to further stabilise the world and counter effects such as those that will occur in 2012.
The gun, photomultiplier tube, gas hypodermic and Faraday cup all rotate on a common yoke with an axis through the centre of the horizontal detection plane, allowing all geometries from the perpendicular plane to the coplanar geometry to be accessed. AcuA±a leads the international team that built and operates the Mars Global Surveyor magnetometers. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate in Washington.

Hospital emergency preparedness regulations uk
American me free movie online 720p
Post apocalypse open world games

Comments to “Earth magnetic rotation energy”

  1. BELOV writes:
    Molecular level using eMP bomb in case impacted was Northern Ontario , as far.
  2. 8km_yek writes:
    Across your entire body, not.
  3. azercay_dogma_cay writes:
    The correct speedily in case disaster strikes, with have a rain.