The different designs are differentiated by being a different "model" or "series." Confusing the issue even more, some manufacturers "private label" their machines for large department stores. Such as Sears' Kenmore and Montgomery Ward's Signature machines. Check the following list to determine if you have one of these "cross-branded" machines. They are known in the parts houses as "Whirlpool belt-drive" models. In the early 80's, Whirlpool began manufacturing their "Design 2000" washers. My grandparents the Walter Sealeys lived just two blocks from downtown in a home on Main St. These machines were sold as GE, Hotpoint, and "private-labelled" as JC Penney and Penncrest brands. In 1995, GE started making a new "front access" washing machine. Unlike the old model, there is no rear access panel on these machines; all the machine internals are accessed through the front.
Sealey Bldg.- still standing!) I was raised in Alachua, coming to school in 1942 (3rd grade) and remaining there until 1952 when I graduated. These machines were sold as GE, Hotpoint, and "private-labelled" as JC Penney and Penncrest brands. In 1995, GE redesigned their dryers. WCI's machines were sold under these original brand names, as well as Westinghouse and White-Westinghouse brands. What wonderful memories I will always cherish from my hometown! ?My husband bought our first car when we married in 1957, from Bill Enneis.?Thigpen's Drug Store was on the corner of Main Street. Frankly, these washers were pretty poorly designed, displaying major oil and water leakage within five years. In the '90's, WCI was bought by Swedish giant Electrolux, who changed the company name back to the Frigidaire Home Products Company. WCI's machines were sold under these original brand names, as well as Westinghouse and White-Westinghouse brands. In the '90's, WCI was bought by Swedish giant Electrolux, who changed the company name back to the Frigidaire Home Products Company.
They have continued to manufacture these "Herrin" machines as Maytag "Performa" models and high-end Crosley brand machines, but they have gone through a LOT of evolution. The orbital machine, manufactured since the late '80's, is a "Newton" machine with a redesigned "orbital" transmission with only six moving parts.
The "orbital" transmissions are interchangeable with the pre-1980's so-called "counterweight" transmissions. He also sold tickets to ride the train to Wiliford, Bell, Curtis and Wannee to the west of Alachua, and to LaCross, Brooker, Sampson City, and Starke to the east of Alachua. You can find them in the yellow pages under the following headings:APPLIANCES, HOUSEHOLD, MAJORAPPLIANCES, PARTS AND SUPPLIESREFRIGERATORS, DOMESTICAPPLIANCES, HOUSEHOLD, REPAIR AND SERVICECall a few of them and ask if they are a repair service, or if they sell parts, or both. Unlike the counterweight machine, the gearing in the orbital transmission can be serviced without removing the transmission from the machine.1-2 BEFORE YOU STARTFind yourself a good appliance parts dealer.
You can find them in the Yellow Pages under the following headings:APPLIANCES, HOUSEHOLD, MAJORAPPLIANCES, PARTS AND SUPPLIESREFRIGERATORS, DOMESTICAPPLIANCES, HOUSEHOLD, REPAIR AND SERVICECall a few of them and ask if they are a repair service, or if they sell parts, or both. Waters family, was the agent at the Atlantic Coast Line Railroad (ACL) across the street, both depots were on the south end of town. However, you don't want to badger them with TOO many questions, so know your basics before you start asking questions. Some parts houses may offer service, too.
They'll tell you it's too complicated, then in the same breath, "guide" you to their service department. They'll tell you it's too complicated, then in the same breath "guide" you to their service department. They should contain the model number SOMEWHERE. If you have absolutely NO information about the washer anywhere, make sure you bring your old part to the parts store with you.
They should contain the model number somewhere. In any case, and especially if you have absolutely NO information about your dryer anywhere, make sure you bring your old part to the parts store with you. Sometimes they can match an old part by looks or by part number.1-3 TOOLS (Figure 1-2)The tools that you may need (depending on the diagnosis) are listed below. Highway 441 ran through Alachua on main street; the by-pass and overpass was not built until the forties. Formerly there had been a big cotton farming operation in the area supporting two cotton gins. One gin was in the middle of town on a spur railroad track of the SAL and one on the south end of town on SAL's mainline.
In general ,however, because the "Main stay'* of the economy of the community was farming, the area did not suffer as much as other areas. An inexpensive one will suffice, as long as it has both "AC Voltage" and "Resistance" (i.e. Little happened during the week; school, church, gardening, cleaning yards and a few social club meetings. There was visiting with friends, getting haircuts and other amenities of life that you hadn't done in weeks or months. It can save you lots of time and hassle.1-4 BASIC REPAIR AND SAFETY PRECAUTIONS1) Always de-energize (pull the plug or trip the breaker on) any washer that you're disassembling. It's true that diagnosing and repairing electrical circuits requires a bit more care than most operations, due to the danger of getting shocked. If you need to re-energize the washer to perform a test, make sure any bare wires or terminals are taped or insulated. Energize the unit only long enough to perform whatever test you're performing, then disconnect the power again. 2) To work underneath the washer sometimes requires leaning the washer back against the wall at a 30- to 45-degree angle.
Most businesses closed at 5 - 6 O'clock, but grocery stores stayed open until 8-10 O'clock. Remember the rule in section 1-5 (1); while you are working on a circuit, energize the circuit only long enough to perform whatever test you're performing, then take the power back off it to perform the repair.
You will only need to be able to set the VOM onto the right scale, touch the test leads to the right place and read the meter. In using the VOM (Volt-Ohm Meter) for our purposes, the two test leads are always plugged into the "+" and "-" holes on the VOM. Always have someone standing by to help you while you work beneath the washer, in case it comes down on you.Figure 1-7: Leaning the Washer Against the Wall 3) If the manual advocates replacing the part, REPLACE IT!! There is a reason that it stopped--you can bet on it--and if you get it going and re-install it, you are running a very high risk that it will stop again. When testing 220 volt circuits (usually in electric dryers) make sure you always follow the precautions in rule 1 of section 1-5!Figure B-4: Testing Voltage1-4(b) TESTING FOR CONTINUITY (Figure B-5)Don't let the word "continuity" scare you. It's derived from the word "continuous." In an electrical circuit, electricity has to flow from a power source back to that power source. Replace the part. 4) If you must lay the washer over on its side, front or back, first make sure that you are not going to break anything off, such as a drain hose or fill valve. And for goodness' sake, make sure you drain the thing completely first! 5) Always replace the green (ground) leads when you remove an electrical component. And NEVER EVER remove the third (ground) prong in the main power plug! 6) When opening the washer cabinet or console, remember that the sheet metal parts are have very sharp edges. The Four H Club, sponsored by the school and County Agent, was a big influence in the community. It should peg the meter all the way on the right side of the scale, towards "0" on the meter's "resistance" scale.
If you're not getting full power out of the outlet, you'll know it right away. 2) If you just can't get that agitator unstuck, your appliance parts dealer has a device called an Agi-Tamer for just such an occurrence. Occasionally a theatrical company would come to town and help the community put on a production of some kind. If the meter does not read zero resistance, adjust the thumbwheel on the front of the VOM until it does read zero. It's basically a heavy-duty rubber balloon that fits under the agitator, and uses water pressure to lift it upwards from underneath. 3) If you need to drain the tub (usually because your pump isn't pumping out) most folks try to bail it out. Among the other things you did for entertainment or diversion was to go to Gainesville to see the movies.
There were two theaters in Gainesville; the Florida Theater on University Avenue and the Ritz (Or Lyric) Theater near the post office. One of the cool things about going to tlie movies in Gainesville; they were air conditioned. You can touch the ends of the wires and test leads with your hands if necessary to get better contact.
And what happens when that nice, week-old dirty wash water reaches your mouth? You guessed it: there's a better way. What's the point in sucking the water through the hose?
Well, instead of using lung suction to do that, let's use hose pressure. Leave your garden hose connected to the faucet, and put the other end of it in the washer tub. Ehjring hot weather you would go to Poe Springs, a few miles west of High Springs for swimming and a picnic or to Blue Springs, which was a little further west. If there is GOOD continuity, the meter will move toward the right side of the scale and steady on a reading.


This is the resistance reading and it doesn't concern us; we only care that we show good continuity.
The air is gone now, right? Kink the garden hose so you don't lose the water charge, and disconnect it from the faucet. When you're sure the faucet end of the hose is lower than the bottom of the washer tub, release the kink in the hose. It was located just west of present day I - 75 on the south side of Millhopper Road to Gainesville. If you do not, the switch is bad.   1-4(c) AMMETERSAmmeters are a little bit more complex to explain without going into a lot of electrical theory. If you own an ammeter, you probably already know how to use it. If you don't, don't get one. No muss, no fuss.1-6 HOW TO USE A VOM AND AMMETERMany home handymen are very intimidated by electricity.
The east-west passage was the largest From the west entrance you went east down a gradual slope for 30 to 50 feet.
It's true that diagnosing and repairing electrical circuits requires a bit more care than most operations, due to the danger of getting shocked. When you got to the bottom and center of the cross, you could see an extension to the north that extended 30 to 40 feet.
Remember the rule in section 1-4 (1); while you are working on a circuit, energize the circuit only long enough to perform whatever test you're performing, then take the power back off it to perform the repair. The greater the current that's flowing through a wire, the greater the density of the magnetic field, or flux, it produces aroundthe wire. The ammeter simply measures the density of this flux, and thus the amount of current, flowing through the wire. To determine continuity, for our purposes, we can simply isolate the component that we're testing (so we do not accidentally measure the cur rent going through any other components) and see if there's any current flow. To use your ammeter, first make sure that it's on an appropriate scale (0 to 10 or 20 amps will do).
Several university students were injured exploring the cave and rumor has it that possibly one or more may have died as a result of dare-devil climbing. As the participation in WWII grew in scope and activities the depression ended and the good times returned. C. If you need to re-energize the dryer to perform a test, make sure any bare wires or terminals are taped or insulated. Energize the unit only long enough to perform whatever test you're performing, then disconnect the power again. I want to impress upon you something really important. For our purposes, it doesn't matter how fast the current is flowingTo use your VOM to test continuity, set the dial on (resistance) R x 1, or whatever the lowest setting is.
It's unpleasant, but unless exposure is more than a second or so, the only harm it usually does is to tick you off pretty good.However, 220 VOLTS CAN KNOCK YOU OFF YOUR FEET. Frankly, it's been only out of respect for my parents that I never legally changed my name. Okay, with that behind us, let's see what my dad, at the age of 97, now recalls about the old days in Alachua.
If the solenoid's leads are still connected to something, you may get a reading through that something.
If there is still live power on the item you're testing for continuity, you will burn out your VOM instantly and possibly shock yourself. Touch the two test leads to the two bare wire ends or terminals of the solenoid.
His station was at the southernmost rail line running by Copeland Sausage Company and Ennis Motor Company. And if you get it going and re-install it, you are running a very high risk that it will stop again. Leland manned the Seaboard station just a few yards from Papa Waters' Coastline station on the south end of town. David manned another Coastlme station, known as "East Alachua," which was located up by the current location of US 441. The old road tfiat comes in under the railroad overpass and then turns north at Main Street was the original US 441 . Replace the part. 3) If you must lay the dryer over on its side, front or back, first make sure that you are not going to break anything off, such as a gas valve. Lay an old blanket on the floor to protect the floor and the finish of the dryer. 4) Always replace the green (ground) leads when you remove an electrical component.
Passengers traveling to High Springs would disembark in Alachua and look for other transportation to High Springs. And NEVER EVER remove the third (ground) prong in the main power plug! 5) When opening the dryer cabinet or console, remember that the sheet metal parts are have very sharp edges. Wear gloves, and be careful not to cut your hands! 6) When testing for your power supply from a wall outlet, plug in a small appliance such as a shaver or blow dryer. The ammeter simply measures the strength of this magnetic field, and thus the amount of current, flowing through the wire. To determine continuity, for our purposes, we can simply isolate the component that we're testing (so we do not accidentally measure the current going through any other components) and see if there's anycurrent flow.To use your ammeter, first make sure that it's on an appropriate scale (0 to 10 or 20 amps will do).
As results were telegraphed in, he would give them to my dad (Beb), who would "run" them to City Hall, where a large board displayed the latest election information. The center of town in those early days was just north of the Seaboard tracks, on the southern end of Main Street, as I think of it today.
Mott's blacksmith shop was just up the street from the barber shop of Willie Cauthen (Hal's dad). WCI's machines were sold under these original brand names, as well as Westinghouse and White-Westinghouse brands.
One of tfie hotels, The Hawkins House, later named the Skirvin Hotel, was just south of the southernmost railroad tracks. Large bowls and platters of meats, potatoes, vegetables and breads were placed on the tables and the guests would pass them around just like at a large family gathering. I recall one summer when Dad and I were "batching" and he and I ate there quite often. Living in town, we enjoyed the convenience of regular home delivery of the block of ice needed to keep food in the box cool. The old man who delivered the ice was named Lige, but I don't recall the name of the horse that pulled the wagon. The best-known train that ran through town was named "Peggy." Peggy was a Seaboard train that ran from Staike through Bell to Wannee, where the train would turn around and retrace its route. I recall a story that now escapes Dad's memoiy about what his mom and the other Waters mothers would do from time to time when the kids got under foot. Since all three moms in the Waters clan had access to the railroad, they could use "Peggy" to occupy the kids for a few hours. Simply put the kids on the train when it arrived from Starke, and they would be out of the way for a few hours while riding down to Wannee and back.
I remember at least one occasion when my cousins Larry, Johnny Dampier, Lano (Delano), maybe Clara Nell, and I made that trip.
Since all the "big boys" (older cousins) got off during the temporary stop, of course I did too.
As the runt of the lot, I was the last to grab for the hand rail when the train started moving, and I almost had a very long walk back to Alachua. Other entertainment for Waters boys: Ventures into Warren*s Cave were treacherous in Dad's day.
He says they had no flashlights, so they took "fat pine" sticks to light up, once they were deep enough to need a light source. Dad recalls one occasion when the circus was in town and some of the horses got loose just as a train was passing though. It was an outdoor theater composed of a billboard-type screen and rows of logs for the audience to use for seating. The show was located in a vacant lot on the east side of Main Street, approximately one block south of the main downtown intersection, where the First National Bank was located for many years.
Marbles were a lot less expensive than the electronic devices kids have for entertainment today.
So was everything else! Bland Horse Races 1944  By Kent Doke:The Bland horse races actually started in Haynesworth in the summer of 1944 when Paul Emery and I raced our horses on the straight graded road North of Hollingsworth.
I had borrowed an English saddle to race with and when we jumped off, the right stirrup leather came off the safety catch and was dragging. I couldn't get it off my foot and was afraid the horse would step on it and drag me off I always claimed that was why I lost the race and it was why I rode bareback in all the races to follow. Somehow Jessie Shaw got involved and we started having horse races in Bland every Wednesday afternoon after school.


At that time people not in the service were making more money than they had ever made in their life. It's true that diagnosing and repairing electrical circuits requires a bit more care than most operations, due to the danger of getting shocked. No cars were being made during the war so people rode with each other to the nearest entertainment.
What is now County Highway 241 that runs out from Alachua to the Santa Fe River was at that time a seldom graded road. In the late thirties and early forties this new road was being cut using only mules and convict labor. I still remember the guards with shotguns loaded with buckshot guarding the prisoners as they drove the two mule teams pulling small drag buckets of dirt.
Jessie really got into the racing; he would grade one quarter mile of the road using a tractor and a grader he bought.
He cut the fence so cars could be parked on the West side of the road and, at it's peak, we would have about 250 people out to see the races. I raced my own horse, The Santa Fe River Ranch entered a horse, Jessie raced a horse, Roy Ceilon, J.
And for goodness' sake, make sure you drain the thing completely first! 5) Always replace the green (ground) leads when you remove an electrical component. Once George Duke brought a race horse and jockey with a jockey saddle in to race against Roy's horse. We were very lucky to win that race and did so only because the jockey couldn't control the horse at the start. The air is gone now, right? Kink the garden hose so you don't lose the water charge, and disconnect it from the faucet. About fifty years after the races had stopped I asked Roy how much he thought was bet on those races and he said probably about twenty five hundred dollars.
When you're sure the faucet end of the hose is lower than the bottom of the washer tub, release the kink in the hose. Also about fifty years later I was introduced to an old lawyer in Gainesville who asked me if I had ever ridden horses in the Bland Races.
The greater the current that's flowing through a wire, the greater the density of the magnetic field, or flux, it produces aroundthe wire. It's true that diagnosing and repairing electrical circuits requires a bit more care than most operations, due to the danger of getting shocked. Makes me feel good, even now. Aiachua High School Memories  Charles Beverly (Beb) Waters Class of 1930 The Alachua Indians played football on a field that was right next to the school rather than down the hill from the grammar school.
The offense was the Notre Dame Box, The quarterback lined up about four feet behind the center and had a fullback lined up a few feet behind him. The other two halfbacks were lined up on their left (or right), stacked one behind the other to form a square box. The QB would take a direct snap and then hand off to one of the backs or drop back to pass. And yes, we wore leather helmets and had drab brown canvas pants; and the jerseys were whatever you could find and had no numbers.
Alachua didn't have a good punter, so Marion Pearson would try to throw a long Interception rather than try a weak punt.
For our purposes, it doesn't matter how fast the current is flowingTo use your VOM to test continuity, set the dial on (resistance) R x 1, or whatever the lowest setting is.
The Big Rival was the High Springs Sandspurs, at least until around 1929 when we had "the Big Fight" playing in High Springs, The referee that night was a prominent High Springs doctor (Whitlock?), maybe even the mayor. Emotions were running high, and an intense argument between players, coaches and the referee ended in a Big Fight when Jessie Shaw knocked the referee out cold and the townspeople charged the field. I prudently ran for the car. As a result of the fight, the teams didn't play each other again for a number of years (20?). If the solenoid's leads are still connected to something, you may get a reading through that something. School buses couldn't be used for game trips, so townspeople would drive the players, Barney Cato was a rural mail carrier and had a son on the squad.
The school buses back then were Model A trucks with a row of seats down each side and a bench down the middle. A long one story building was in its' place containing eight classrooms and a big auditorium.
One big event of that year was a class play about the Pilgrims Thanksgiving and with the Indians. One day a student walked behind her, on the way to the restroom, and kicked the chair out from under Miss. I had to wear glasses beginning in the seventh gi'ade, so did not participate in sports much. Perhaps the biggest event in our High School lives was the Junior and Senior theatrical productions. The Junior class play was usually produced in the fall and the Senior class play in the spring.
Wq were excused from classes to climb into a ton and a half truck to go load scrape iron from some garage or farm. Som.eone asked her a question and she answered, "just a minute, I have the answer right here in my drawers".
So, if you could manage to leave the Supply room unlocked, you then had to find a classroom window unlocked. In closing I have always told anyone who asked, my years at A H S was comparable to the Tom Sawyer story. One gin was in the middle of town on a spur railroad track of the SAL and one on the south end of town on SAL's mainline. There was visiting with friends, getting haircuts and other amenities of life that you hadn't done in weeks or months. Frankly, it's been only out of respect for my parents that I never legally changed my name. Okay, with that behind us, let's see what my dad, at the age of 97, now recalls about the old days in Alachua. Leland manned the Seaboard station just a few yards from Papa Waters' Coastline station on the south end of town.
The old man who delivered the ice was named Lige, but I don't recall the name of the horse that pulled the wagon. I recall a story that now escapes Dad's memoiy about what his mom and the other Waters mothers would do from time to time when the kids got under foot. I couldn't get it off my foot and was afraid the horse would step on it and drag me off I always claimed that was why I lost the race and it was why I rode bareback in all the races to follow. He cut the fence so cars could be parked on the West side of the road and, at it's peak, we would have about 250 people out to see the races. Once George Duke brought a race horse and jockey with a jockey saddle in to race against Roy's horse.
We were very lucky to win that race and did so only because the jockey couldn't control the horse at the start.
Alachua didn't have a good punter, so Marion Pearson would try to throw a long Interception rather than try a weak punt. As a result of the fight, the teams didn't play each other again for a number of years (20?). School buses couldn't be used for game trips, so townspeople would drive the players, Barney Cato was a rural mail carrier and had a son on the squad.
A long one story building was in its' place containing eight classrooms and a big auditorium. I had to wear glasses beginning in the seventh gi'ade, so did not participate in sports much.




Reverse address lookup spain 51
Reverse cell phone trace free technology
Best family cell phone plans no contract 873


Comments to How do i find the model number for my samsung tv

farcury

16.08.2015 at 10:10:51

Will attempt that number tracker on the web,mobile quantity place.

asasa

16.08.2015 at 17:30:42

The money owed that you will not locate.