Best alternative medicine for acid reflux 99

Signs herpes outbreak is coming

Our homes today are loaded with more electronic media and electric appliances than ever before.
A large portion of any electricity bill is usually attributable to central heating and air conditioning; I try to temper those costs by simply adjusting my programmable thermostat higher in the summer (78 degrees F) and lower (68 degrees F) in the winter. To help you answer that question, I’ve put together a couple of simple spreadsheets that approximate hourly and monthly energy consumption of some common household appliances and electronics, as shown in the top and bottom figures, respectively. Keep in mind the energy figures are only gross approximations and, as a result, your experience may be different. If you like to drink coffee all day long, your coffee maker could be costing you more in energy costs than your refrigerator!
You may be happy to know that cutting back on your television and computer use will provide only minimal energy savings. If you would like the actual Excel spreadsheet I created to make your own energy cost estimates, send me an e-mail and I will be more than happy to send it to you. For more information on how to calculate energy consumption and tips on how to save energy, you can also check out this website sponsored by The United States Department of Energy.
Your TV may not use a lot of electricity, but if it has a remote (what one does not) then it has phantom loads which can add up. I have to create an annual energy consumption for a domestic premises for my homework i would b grateful if you could send me your excel appliances spreadsheet.
I’ve been thinking about buying an energy meter to see how much appliances use when in use and in standby mode, but this list is a helpful guide. And Kill-a-watt device is fairly cheap and can help you sniff out those devices that draw power when they’re not even on. Thank you for sharing this, we really need to save energy these days not just to save money but also to help our environment suffering from Global warming.
This site is for informational and entertainment purposes only, and the content herein should not be mistaken for professional financial advice.
ODYSSEE MURE is a project coordinated by ADEME and supported under the Intelligent Energy Europe Programme of the European Commission.
This briefing is part of the EEA's report The European Environment - State and Outlook 2015.
We use cookies to record some preference settings and to analyse how visitors use our web site. Based on the ratio: energy consumption by end uses divided by the number of permanently occupied dwelling. The energy consumption of households is decomposed in different explanatory effects: change in average dwelling size, increasing number of appliances (more electrical appliances) and central heating diffusion, energy efficiency improvement (as measured from ODEX) and change in behaviour related to more confort.
Over the period 1990-2009, energy efficiency in the household sector increased by 24%, at an average rate of 1.4% per year (Figure 1).
For the EU-27 as a whole, new dwellings built in 2009 consumed about 40% less energy than dwellings built in 1990, because of new building codes[3] (Figure 9).
Over the period 2005-2009, the average energy efficiency improvement rate at EU level was 1.3% per year.
Space heating represented 68% of total household consumption in 2009 compared to 74% in 1990. To avoid yearly fluctuations due to climatic variations from one year to the other and have consistent trends, the household energy consumption should be measured at normal climate (i.e.
The observed progress in energy efficiency was due to better thermal performance of buildings, more efficient large electrical appliances (cold and washing appliances) and heating systems (condensing boilers and heat pumps).
Energy consumption for water heating represented around 12% of the household consumption in 2009. Solar energy is promoted in many countries to substitute conventional energies presently used to produce hot water.
In France there is an energy saving obligation for energy suppliers above a certain level of sales. The figure shows an estimate of the impact standards on new buildings had on the average unit consumption for space heating of the dwelling stock for the EU as a whole.
The right figure shows the reversed trends with an increasing electricity consumption of air conditioning.
Over the period 1990-2010, energy efficiency in industry has improved in EU-27 countries by 29%, at an annual average rate of 1.7% per year (Figure 1). Over the period 1990-2010, energy efficiency in the household sector increased by 27%, at an average rate of 1.6% per year (Figure 1). Energy efficiency improvements for space heating occurred as a result of better thermal performance of buildings encouraged by mandatory efficiency standards for new buildings, increase in the penetration of A condensing boilers and heat pumps and the thermal retrofitting of existing dwellings. Energy consumption for air conditioning per m2 for the stock average is increasing rapidly (Figure 6, graph 1).
In the EU-27 countries, energy efficiency in the transport sector increased by 15% between 1990 and 2010, at an annual average rate of 0.8% due to increased efficiency particularly for passenger cars and airplanes. The ODEX indexA (Fig.1) measures the energy efficiency progress by main sector (industry, transport, households) and for the whole economy (all final consumers). The sub-sectoral indices are calculated from variations of unit energy consumption indicators, measured in physical units and selected so as to provide the best a€?proxya€? of energy efficiency progress, from a policy evaluation viewpoint. The weight used to get the weighted aggregate is the share of each sub- sector in the total energy consumption of the sub a€“sectors considered in the calculation. The variation of the specific consumption of space heating per dwelling linked to building standards is modelled as the change brought about by the introduction of new dwellings with a better insulation than the whole stock since a base year (e.g. The trend in final energy consumptionA provides a broad indication of progress in reducing final energy consumption and associated environmental impacts by the different end-use sectors (transport, industry, services and households). The Europe 2020 growth growth strategy aims to address shortcoming of the European economic model while creating coditions for smarter, more sustainable and inclusive growth.
On 15 December 2011, the European Commission adopted the Communication "Energy Roadmap 2050".
On 10 November 2010, the European Commission has adopted the Communication "Energy 2020 - A strategy for competitive, sustainable and secure energy". Energy Efficiency Plan 2011, [COM(2011) 109 final] Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions. With its "Roadmap for moving to a competitive low-carbon economy in 2050" the European Commission is looking beyond these 2020 objectives and setting out a plan to meet the long-term target of reducing domestic emissions by 80 to 95% by mid-century as agreed by European Heads of State and governments. The climate and energy package is a set of binding legislation which aims to ensure the European Union meets its ambitious climate and energy targets for 2020. Methodology of data manipulationThe trends observed for some sectors or end-uses, especially for space heating are very irregular, which results in strong fluctuations in the ODEX, that are difficult to understand as energy efficiency progress should normally change smoothly (incremental technical change). Some sub-sectors are not accounted for in ODEX, such as mining, construction, other manufacturing industries, small electrical appliances, lighting, services.
The unit consumption is expressed in terms of energy used per ton produced for energy intensive products (steel, cement and paper) and in terms of energy used related to the production index for the other branches.
For the transport sector, the evaluation is carried out at the level of 8 modes or vehicle types: cars, trucks, light vehicles, motorcycles, buses, total air transport, rail, and water transport. For households, the evaluation is carried out at the level of 3 end-uses (heating, water heating, cooking) and 5 large appliances (refrigerators, freezers, washing machines, dishwashers and TVs).
To calculate the ODEX (Fig.1),A data submitted to the ODYSSEE project by countries on voluntary basis is used.
By Solar Panels Photovoltaic On November 18, 2013 · 10 Comments Power consumption appliances chart of 101+ household appliancesIron, vacuum cleaner cc Philips Communications.
If you want to calculate the usage and costs for a new home or summer vacation house you would have to make an assumption based on the electricity usage for the appliance that you are planning to use. This is a list of power consumption for some of the typical electrical devices that you could find in a home.
One has to keep in mind that some of the devices on this list will only be used during a very short time and therefore not consume that much electricity even if the hourly wattage is high. Another thing is the refrigerator the wattage stated here is the amount of power it draws when running at maximum power. The lighting is not even on the power consumption appliances chart because i think that everyone understands that a 100w lightbulb consumes exactly 100w and a 12w fluorescent tube consumes 12w and so on.

An interesting list of power hungry appliances, definitely worth taking a look at specially if you have a large electricity bill.
Power consumption of 101+ typical household appliances : How much energy do you use every day? How to find the Best solar panel angle or tilt angle : What tilt angle should I install my solar panels in? How to clean solar panels the right way- Your Guide to solar panel cleaning : So your photovoltaic system is dirty and you are asking yourself how to clean solar panels without damaging them or getting yourself electrocuted. Types of solar panels- which one to chose : There are lots of different types of solar panels out there and to the unexperienced ones it may appear as a solar jungle.
Solar panel direction explained – What side of the roof should I put my solar panels on? Solar Panels Cost : If solar power is so inexhaustible and readily-available, why aren't more people using it to power their homes? Never lose anything again with the worlds smallest solar powered portable GPS tracker : Hey! 6 disadvantages of solar energy : Everyone is rambling on about all the great assets of solar power, but what about disadvantages of solar energy? Looking for something?Use the form below to search the site:Still not finding what you're looking for? Simply pick an appliance and then look at the column that best represents your approximate electricity costs.
You should also be aware that these cost approximations do not consider phantom power that many appliances draw when they are switched off.
If your coffee maker is on for 8 hours per day then it is, as can be seen in the second figure. To start with you can simply schedule your ac to only run when your home, having it cut off a few minutes after you leave and about 30 mins before you get home.
If they are running in uninhabited rooms they are using energy and actually contributing heat to the room in the form of waste heat from the motor. Ultimately, you and you alone are responsible for the decisions you make in life, so please contact an independent financial professional for advice regarding your particular situation.
This project gathers representatives such as energy Agencies from the 28 EU Member States plus Norway and it aims at monitoring energy efficiency trends and policy measures in Europe. The EEA is an official agency of the EU, tasked with providing information on Europe's environment.
The data extracted from the ODYSSEE database and used in the graphs are: the energy consumption by end uses, stock of dwellings, the average floor area, the number of large electrical appliances, the share of central heating.
Unit consumption per dwelling for space heating with climatic corrections, Unit consumption of hot water per dwelling, Unit consumption per dwelling for cooking, Unit consumption per m2 for space heating with climatic corrections, Stock of dwellings (permanently occupied). Part of these improvements occurred in the area of space heating due to better thermal performance of buildings encouraged by mandatory efficiency standards for new buildings, and a larger penetration of high efficiency boilers (e.g.
For large appliances, the improvement in energy efficiency results from technical improvement driven by EU mandatory Directives on labelling and voluntary agreements with equipment manufacturers. This approach overestimates theA  impact of building regulations as it is well known, but not well quantified , that the actual unit of new dwellings is higher than this consume more than this theoretical consumption, because of non compliance and rebound effects (the fact that in well insulated dwellings occupants tend to have a higher indoor temperature than in less insulated dwellings). Over the same period, final household electricity consumption increased faster, at an annual growth rate of 1.7%.
The share of electricity for lighting and appliances increased from 10% to 15% in 2009 compared to 1990. However, part of this improvement was offset by increased number of electrical A appliances, larger homes and the diffusion of central heating[7] . Central heating (around 85% of EU dwellings in 2009) , which includes district heating, block heating, individual boiler heating and electric heating, implies that all the rooms are well heated, as opposed to room heating, where generally a stove provides heat to the main room only. Solar water heaters can represent a good economical and environmental solution mainly for southern countries which benefit from a good solar irradiation. All EU countries have developed thermal regulations for new dwellings, some of them being introduced as far back as during the seventies[1]. The reduction was quite significant in The Netherlands[5], Ireland and France since 1990, as well as in some new member countries since 2000 (e.g. This approach overestimates the impact of building regulations as it is well known, but not well quantified, that the actual unit of new dwellings is higher than this consume more than this theoretical consumption, because of non compliance and rebound effects (the fact that in well insulated dwellings occupants tend to have a higher indoor temperature than in less insulated dwellings).
For each sector, the index is calculated as a weighted average of sub-sectoral indices of energy efficiency progress; sub-sectors being industrial or service sector branches or end-uses for households or transport modes.
1990), assuming that the unit consumption of new dwellings is equal to the theoretical value implied by thermal regulations (Fig.2). The improvements of the energy performance of buildings as a result of tightening building codes are represented also in percentage change compared to 1990 levels (Fig.2).
Increased energy efficiency can lead to significant reductions in energy consumption provided that measures are in place to discourage the occurrence of rebound effects. GHG emissions, air pollution, etc) depends both on the sources of energy as well as on the total amount of energy consumed.
One of the headline targets include the objective of increasing the share of renewable energy in final energy consumption to 20% by 2020. Presents a roadmap for action in line with a 80-95% greenhouse gas emissions reduction by 2050. The EU is committed to reducing greenhouse gas emissions to 80-95% below 1990 levels by 2050 in the context of necessary reductions by developed countries as a group. The CommunicationA defines the energy priorities for the next ten years and sets the actions to be taken in order to tackle the challenges of saving energy, achieving a market with competitive prizes and secure supplies, boosting technological leadership, and effectively negotiate with our international partners. It shows how the sectors responsible for Europe's emissions - power generation, industry, transport, buildings and construction, as well as agriculture - can make the transition to a low-carbon economy over the coming decades.
Such fluctuations can be linked to various factors: imperfect climatic corrections, especially with warm winters, behavioural factors, influence of business cycles, imperfection of statistics, especially for the last year. The reason is that energy efficiency progress is difficult to capture with the existing indicators (e.g. Unit energy consumption captures the energy efficiency development better than traditional energy intensities (per unit of value added). The overall energy efficiency index aggregates the trends for each transport mode in a single indicator for the whole sector.
The easiest answer to this question you will find at the bottom of your electrical bill or by contacting your power company.
The wattage that are stated for them are approximate and can vary depending on either model and brand or both. An example of such an home appliance can be the microwave often used only a couple of minutes at a time to quickly heat up food and beverages. Both refrigerator and fridge will actually automatically try to conserve power by turning itself on and off depending on the interior temperature. If you would like to know more on what light to use when and wattage conversation rates for different types of light bulbs we have a whole article about that. A question many of us asks when the decision to finally install a solar system in our home is finally made.
For the most part, these phantom loads only increase the appliance’s energy consumption by a few watt-hours, but extremely frugal folks can still squeeze additional savings from their electricity bill by unplugging these appliances or using a power strip to cut power to them when they are not in use.
However, they are also saving me money by helping to reduce the amount of time my central air is running.
This website accepts cash advertising, sponsorship, and other forms of compensation that may occasionally influence advertising content or topics of discussion. As a result, the share of the most efficient appliances (A, A+, A++) has increased significantly: from 6% in 1997 to 94% in 2009 for refrigerators and from 3% to 95% for washing machines, for example[4]. There exist large discrepancies among countries: from few improvements for Hungary, Greece to great improvements for new members such as Slovenia, Poland and Romania with an annual average rate of energy efficiency improvement above 2% over the period 2000-2009 (Figure 7). The combined effect of these three factors was an increase in the average consumption per dwelling by around 0.4% a year each (Figure 6), offsetting 60% of the energy efficiency improvement achieved through technological innovation. It is estimated that the replacement of single room heating by central heating increases the energy required for space heating by about 25A % on average.

The energy suppliers falling under the regulation, have to prove a volume of savings proportional to their market share. However, part of this improvement was offset by an increase in the number of appliances and larger homes. Romania, Latvia, Slovenia), thanks to a combined effect of higher energy prices and energy efficiency improvements.
The impact of all these measures was as significant reduction in the average emission of new cars[9]. In fact, the service sector saw the highest increase in energy consumption since 1990 (see ENER16).
TheA effects of the main drivers influencing the energy efficiency progress is represented in percentage change compared to 1990 levels (Fig.3). Reducing energy consumption as a result of energy efficiency progress and behavioural changes can lead to significant reductions in environmental pressures associated with energy production and consumption. It is up to the Member states whether they base their targets on gross inland consumption, final energy consumption, primary or final energy savings or energy intensity. In the Energy Roadmap 2050 the Commission explores the challenges posed by delivering the EU's decarbonisation objective while at the same time ensuring security of energy supply and competitiveness. For some branches the trends shown include also some non-technical changes, especially in the chemical industry the shift to light chemicals, due to the fact that this sector is not sufficiently disaggregated. Therefore, for the EU-27, dataA extrapolations are being used basedA as much as possible on Eurostat supporting data (e.g. The power usage is stated in wattage meaning that the appliance will consume the stated amount of power if left running for a full hour. This would mean that even if the stated 700w is quite a large number you would only be using 5% of that when heating up your dinner for 3 minutes. I personally always wait for the day when you can call your keys to make them play a jolly tune. But while the added electrical loads continue to provide easier and more pleasant lives for us, it also brings higher and higher electricity bills.
All EU countries have developed thermal regulations for new dwellings, some of them as far as the seventies[1]. Between 2008 and 2009, the household energy consumption has decreased by 0.7% due to the economic crisis. Most of the savings in energy consumption in the household sector took place because of improvements in space heating technologies and tighter building codes (see also Figure 9 below). For that purpose, they have to implement actions with their consumers to encourage energy savings investments and will receive in exchange certificates; they are also allowed to buy energy saving certificates from suppliers in excess of their obligation. The combined effect of these two factors increased the energy consumption per dwelling by around 0.4% a year on average (Figure 3), offsetting around 45% of the energy efficiency improvement achieved through technological innovation.
However, the magnitude of the impact of such standards varies across the countries, depending on the number of standards upgrades, their severity and the annual volume of construction (i.e.
There is a factor 4 difference between the lowest energy consumption per m2 in southern countries such as Cyprus and Spain and the northern countries with the highest unit consumption (Estonia, Finland, Latvia); there is a factor 2 difference between these highest values and the other Mediterranean countries (Croatia, Bulgaria, Greece and Italy) and The Netherlands. The share of dwellings with air conditioning has particularly increased in Spain (from 15% in 2000 to 60% in 2010), Italy (from 11% to 35%), Cyprus (from 40% to 90%) and Croatia (from 17% to 27%). Since 2005 we can observe a slowdown in the improvement of energy efficiency for trucks and light vehicles[10], resulting in an increase in the consumption of road goods per tonne-kilometre.
Energy consumption for households per square meter (climate corrected) is represented as percentage change compared to a baseline year (1990, 2000).
This directive has a direct impact on the renewables target since it aims to reduce the final energy consumption, thus making theA renewables target easier to reach. However this indicator does not monitor progress at EU level on the energy efficiency target (different methodologies may be applied for this purpose particularly if the emphasis is on energy savings) but it does provide an indication of progress to date in achieving energy efficiency (in this context energy efficiency means mainly improvements in technological performance).
The implicit assumption in the mode of calculation of the ODEX is that all these sub-sectors have the same energy efficiency gains as the sector average. Differences between countries can be explained by the high energy efficiency potentials available in these countries due to outdated infrastructures (e.g.
With a top-down approach, the impact of solar heating on the household energy consumption will be measured based on the energy statistics. The loss of efficiency during a recession period is linked to the fact that, the energy consumption does not follow the reduction in activity as part of the consumption is not linked to the level of production, also because industrial equipment, such as kilns, boilers or motors, are less efficient when they do not operate at full capacity. In Bulgaria and Slovenia the diffusion of air conditioning is more recent but important (15% of dwellings equipped in 2010). In this way some consistency between this top-down calculation and the bottom up made for specific countries is ensured (also country data makes use of Eurostat to the extent possible). However, the magnitude of this impact varies with the countries, depending on the number of standards upgrades, their severity and the number of new dwellings (i.e.
Gas and electricity are the main energy source in the household energy consumption (39% and 25% respectively in 2009 compared to 29% and 19% in 1990). Unit consumption per dwelling has decreased in almost all EU countries from 1990 to 2009 except in 6 countries, mainly southern countries (Malta, Greece, Cyprus, Spain), Finland and Croatia (Figure 3). In this case, the savings come from the fact that one kWh of solar will replace more than one kWh of conventional energy (due to the convention applied in energy statistics to solar heating, namely that there are no losses in conversion). It is estimated that new dwellings built in 2010 consumed about 40% less energy than dwellings built in 1990, because of new building codes[2]. In 2010, the average unit consumption per m2 for air-conditioning is still low as the percentage of dwellings with air conditioning is low although progressing rapidly. The level of energy saved will depend depending on the type of water heaters replaced (for instance their efficiency). Over the period 1990-2010, improvements took place in all industrial branches except the textile industry. This impact is however limited due to the fact that dwellings built since 1990 only represented 20% of the total stock in 2010. Figure 9 shows an estimate of the impact of building standards in the unit consumption of dwelling since 1990 for a selection of countries[2].
Heat, from district heating, and coal represent 7% and 3% of the household consumption in 2009 (compared to 10% and 12% in 1990). So looking at both energy consumption for water heating and water consumption trends in the households, one could draw some conclusions on the influence of solar heating penetration. The savings values have been agreed upon following a process involving various stakeholders on the basis of expert opinions and survey data. The three most energy intensive branches (chemicals, steel and paper), which represent over 50% of the energy consumption of the sector, reduced their specific energy consumption, i.e. The introduction of new dwellings with better insulation since 1990 contributed to decrease the unit consumption per dwelling at different levels: 12% for Sweden, around 35% for France and Netherlands, 40% for Poland, 50% for Denmark and 70% for Germany. In a bottom-up approach used in national evaluations, solar water heaters are considered as an energy saving technology and thus the saving will be much larger[8]. The details of the calculations are not public but the value of the standardised savings by equipment and actions are published on the Ministry web site[9]. By 2020 all new buildings in the EU should be a€?nearly-zero energy buildingsa€? according to the EPBD. The other factors responsible for the decrease of the unit consumption should be the retrofitting of existing dwellings and the introduction of new more efficient heating appliances (namely, condensing boilers and heat pumps), as well as behavioral savings. Significant improvements were also made in the machinery and cement industries which reduced their specific energy consumption by 31% and 17% respectively.
The required decrease in energy consumption of a€?low energy buildingsa€? will range from 30 to 50% of what is presently required for new buildings with the existing regulations. For large appliances, the improvement in energy efficiency results from technical improvement driven by EU mandatory Directives on labelling, minimum energy standards for cold appliances and voluntary agreements with CECED (the association of domestic equipment manufacturers).
As a result, the share of appliances which are most efficient (A, A+, A++) has increased significantly: from 6% in 1997 to 94% in 2009 for refrigerators and from 3% to 95% for washing machines, for example[4].

Alternative medicine for pancreatic cancer 2014
Is herpes curable now youtube
Signs and symptoms of hsv 1 and 2

  1. 50cent 15.12.2015 at 23:32:21
    Infections Trigger Dormant Viruses To Reactivate Researchers lessened.
  2. alishka 15.12.2015 at 13:51:37
    Than the one take a look at usually dalinex.
  3. milashka_19 15.12.2015 at 20:13:46
    Proven to kill the herpes virus in test know they've herpes as a result.
  4. Virus 15.12.2015 at 23:15:16
    Physique that signals that you likely to recur and could be precipitated sufferers.