Lighting energy use calculator,save energy drawing competition 2014 india,how much does solar energy save you - Good Point

admin 14.04.2016

Earlier this year I wrote about the “coming renaissance of electrical contracting,” an upward trend of electricians transitioning into energy contractors to keep up with demand for green construction. SBI Energy predicts green renovations will make up 13% of the total renovation market by 2015. To help electricians segue into their new role and win a piece of the burgeoning market, here are five green retrofits electricians should pitch to drive business. Out of all the green retrofit projects, lighting retrofits present the biggest opportunity for electricians.
These numbers can be significantly reduced by replacing antiquated lighting systems with an energy efficient substitute. In addition to reduced energy consumption and operating costs, there are other carrots and sticks motivating building owners to retrofit their lighting systems.
Finally, factor in the 2.2 million buildings that are candidates for lighting-system upgrades, and you’ve got a lot of low hanging fruit in the market.
Daylight harvesting is the practice of reducing artificial light in a room when sunlight is available. Three other lighting controls worth mentioning here are dimmers, motion sensors and timers.
Mechanical contractors are typically more qualified to take on heating, ventilation, and air conditioning (HVAC) retrofits. Energy Retrofitters, a licensed electrical contractor from Fort Worth Texas, lists other HVAC retrofits among their services like installing oil, acid, and moisture (OAM) purgers for chillers and adding special additives (e.g. Any article about green retrofits would be incomplete without a discussion of solar photovoltaic (PV) systems and wind turbines. Electricians will likely have the most success pitching “grid-tie” solar systems, especially in areas where sunlight is not abundant.
Wind turbines are another viable option for building owners looking to recoup electricity costs.
Energy management systems have garnered a lot of press over the last year because of Microsoft Hohm and Google PowerMeter.
The compliance challenges that entities such as chemical, energy, or mining companies face are seemingly endless – and endlessly complex.
Steven Wilson here, long time energy efficient lighting wholesaler to businesses, contractors, government facilities, etc.
One of the features of networked lighting controls is the ability to monitor lighting energy use over time and adjust the system to achieve the best possible performance. CLTC, in collaboration with Sempra Utilities, developed a test methodology to evaluate the accuracy and reliability of onboard metering and system reporting features of advanced lighting control systems (ALCS). Here, you can find home energy efficiency tips, information on current programs and incentives, and other useful information to help you save money by conserving energy. Insulating your home and keeping doors and windows well sealed are all examples of home weatherization.
In Texas, most electric utilities participate in energy efficiency programs.A The utilities like to promote energy efficiency, because it helps keep the demand for electricity at a manageable and cost-efficient level. If the utilities can continue sending the same amount of power over the wires instead of having to increase it as the population grows, that means that utilities and consumers are all being energy efficient.
Some electric cooperatives and municipal utilities offer energy efficiency programs as well. For a list of more utilities offering incentives on renewable energy and energy efficiency, visit the U.S.
Although OPUCa€™s jurisdiction does not extend to advocating on behalf of gas utility consumers, we want to provide as much useful information as possible to all types of utility consumers. Before having any energy efficiency measure installed in your home, you should check with 2 or more energy service providers to get the best price for the service. One example of a home energy audit is when a professional home energy auditor checks your home for air leakage. To find an energy service provider in your area that participates in your utilitya€™s energy efficiency programs, click on the link below for your utility company. CenterPoint Energy partners with energy efficiency service providers and local agencies to support residents in saving energy and money. Oncor offers several energy efficiency incentive programs.These programs help residential consumers, business owners and government and educational facilities help jump-start their energy efficiency efforts. This includes AEP's Texas North Company, Texas Central Company, and Southwestern Electric Power Company (SWEPCO). AEP has contracts with national and local firms who may contact you about performing work to help save energy and reduce your electric bill. TNMP offers targeted energy efficiency programs for residential and commercial consumers in its service territory. Xcel Energy offers targeted energy efficiency programs for residential and commercial consumers in its Texas distribution service territory. EPE offers incentives to energy services contractors for projects producing electricity demand and energy savings. Entergy offers incentive programs and ensures that all consumers have a choice of, and access to, energy efficiency improvements to reduce energy consumption. If you meet certain income requirments, you may be able to have free energy efficiency measures done on your home.
The Texas Department of Housing and Community Affairsa€™ Energy Assistance Section administers two federally funded programs through local subrecipient agencies. These programs are the Comprehensive Energy Assistance Program (CEAP) and the Weatherization Assistance Program (WAP). When at home, close blinds and drapes that get direct sun, set air conditioning thermostats to 78 degrees or higher, and use fans in occupied rooms to feel cooler.
When away from home, set air conditioning thermostats to 85 degrees and turn all fans off before you leave.
Do not use your dishwasher, laundry equipment, hair dryers, coffee makers, or other home appliances during the peak hours of 3 to 7 p.m. During periods when conservation is encouraged or requested, typically Monday through Friday from 3 p.m. If you require medical grade oxygen, make sure you have an emergency supply available at all times. Use lumens, not watts, to get the right brightness: A Watts are the amount of energy used, not how bright the light is. Read the package: A Lighting Facts label will be required on packages for most bulbs manufactured after January 1, 2012.
Check Carefully for Dimming: Not every LED or CFL bulb is dimmable, so check then packaging.

Look for the ENERGY STAR label: CFLs and LEDs with the Energy Star Label meet specific performance standards and are subjected to independent testing to help ensure a high level of efficiency and quality.
For more information on energy efficiency programs, helpful tips, and energy-saving products, visit the links below.
Energy Savers provides consumers with tips for saving energy and money at home and on the road. As the state energy office, SECO partners with Texas consumers, businesses, educators and local governments to reduce energy costs and maximize efficiency.
Numerous steps have been taken to increase energy efficiency in buildings on the Storrs campus. UConn expects a dramatic drop in its electricity demand due to an extensive lighting system upgrade campaign targeting 67 buildings on campus.
Reducing lighting energy demand is one of the most effective methods for reducing total energy consumption. After a prioritization assessment was performed by campus sustainability work groups, ConSERVTM was hired to perform the installation upgrades.
These lighting system upgrades also include the installation of controls like motion and occupancy sensors, which turn off the light when they stop detecting movement; and daylight sensors, which maximize use of sunlight by turning on the lights only when natural light is insufficient for people to see inside the area. ConSERVTM engineers have projected estimates for how much energy and money may be saved as a result of the lighting upgrades, a project which consists of four phases. Over the past few months the University has been upgrading outdoor lights on buildings across campus and replacing the old metal halide bulbs with more energy efficient light-emitting diode (LED) bulbs.
In addition, all new buildings on campus are being outfitted with energy efficient lighting. Since the bulbs last much longer than before there is also a significant reduction in maintenance and cost as they don’t need to be replaced as often meaning in-house staff can be used more efficiently. The next phase of the project will be the replacement of the incandescent bulbs in pole lights across campus. A fast growing segment of this green construction market is building retrofits, or energy efficient renovations. While our guide is intended for electricians, it can be used by any homeowner or building owner looking to adopt sustainable building practices.
According to the American Council for an Energy-Efficient Economy (ACEEE), lighting accounts for more than 40 perent of the commercial sector’s electricity consumption. Utility companies and other organizations offer incentives (here’s a handy look-up tool for California residents), while new legislation requires buildings to use energy-efficient lighting.
According to a study performed by the NRC Institute for Research in Construction, it can reduce lighting energy costs by 20 to 60%. These energy savers have been around for years, but they are just as relevant today as when they first came out.
However, as electricians move into the role of energy contractors, they will need to provide a complete energy solution. But others can be performed by an electrician because of their overlapping skills and knowledge.
Using this type of system, the building remains connected to the utility power grid but disconnects as soon as enough solar power is available. While less common than solar photovoltaic systems, wind turbines can reduce electricity bills by 50 to 90%, according to the American Wind Energy Association. These alternative power generation methods are getting attention and they present job opportunities for electricians.
There are hundreds more building products and technologies that will improve energy efficiency, while reducing energy costs. He spends most of his day writing for the company blog and getting the word out about Software Advice’s resources.
And because the word “compliance” means different things to different people, there are various ways to consider the state of being in compliance.
If you’re looking for superior lighting products at exceptional value, you’ve come to the right place! Facility managers can match system use to expectations and adjust system settings to result in optimized user comfort while maximizing savings. The project team applied the procedure to three commercially available ALCS in order to refine the methods and help the utility determine if such features were currently reliable and accurate enough to substitute for the independent and expensive collection of sub-metered data often required to calculate project savings and associated financial rebates. An energy service provider can be a home energy auditor, air conditioning company, insulation company, and even a home builder.A You should ask the energy service provider if there is a discount based on what incentives your utility may be offering.
They do this by closing all the windows and doors and then pumping air throughout your home to check if air is leaking to the outside.
These residential programs are geared to assist residents in making energy efficient upgrades that reduce energy consumption, save money and benefit the environment. By offering a comprehensive set of programs, TNMP ensures that consumers in all classes have access to energy efficiency services.
By offering a comprehensive set of programs, Xcel Energy ensures that consumers in all classes have access to energy efficiency services. This is offered through the Public Utility Commission's Hard-to-Reach Standard Offer Program.A Ask your utility or retail electric provider about the standard offer program available in your area. Application intake, income verification, and all client services are handled by the local agencies. This is especially important if you do not have a mode of transportation.A  You should also have an alternate location for shelter. Also make sure you have a battery-powered radio, a flashlight, and extra batteries in a place you can easily find them.
Three milligrams is an infinitesimal amount compared with old thermometers, which containedA  500 mg of mercury.
By following just a few of the simple tips found on this Energy Savers website, you can make your home more comfortable and easier to heat and coola€”while you save money. wants to help change this by providing Texans with the tips, tools, and information to be more energy efficienta€”and save money in the process.
According to the Department of Energy, the average office building can attribute 29% of its total energy demand to lighting!1 This means that there is the potential for tremendous energy savings by increasing the efficiency of our lighting systems.
They are replacing old high intensity discharge (HID) light bulbs with new T-5 fluorescent bulbs. According to the US Department of Energy, approximately 29% of electricity used by the average office building can be attributed to lighting. According to the Federal Highway Administration (FHWA), the average fuel economy of a passenger car is 22.1 miles per gallon.
LED bulbs use less power (watts) relative to the amount of light generated (lumens) and also help to reduce greenhouse gas emissions by saving energy.

The use of LED lighting in the new Center for Student Services helped to reduce lighting energy consumption by 53% over a typical building of the same type.
The project has resulted synergy between environmental awareness and operational efficiency. So far 2 pole lights have been retrofitted with LED and there are plans to replace 50 more, all of which would be eligible for a rebate from NSTAR. Not to mention, it makes up nearly 20 percent of all electricity used in the United States (including residential and industrial spaces). LEDs are much more efficient than incandescent lamps – LEDs use 2 to 10 watts of electricity while incandescent lamps use 60 watts – and they are close to becoming a replacement for fluorescent tubes (see: Are LED Tubes Ready for Prime Time?). Call it “upselling” if you will, but electricians should pitch this retrofit to customers that are already relamping their homes and buildings. Consider this quote from Lara Schwicht Richards, manager of marketing projects for the National Electrical Contractors Association (NECA): “Energy solutions are a growing market for electrical contractors at a time when traditional construction work is declining,” she says. For example, electricians can install electrical consumption economizers – devices that reduce energy use of AC units – or programmable thermostats that optimize efficiency of HVAC equipment.
As Rob Colgan, executive director of marketing for NECA, points out: “Consumers are becoming more educated about alternatives to conventional power generation, such as solar, wind and biomass. And with buildings producing up to 70% of some cities’ carbon emissions (as reported by the Energy Circle blog), there has never been a more relevant time to implement these technologies. Real-time energy monitoring offered by some control systems has also piqued the interest of utility program managers in locations in the U.S.
National ratings systems, such as LEED, may also consider and reward long-term performance on a more verifiable basis.
That means you will not need your air conditioner or heater running as much to keep the house at a comfortable temperature.A And of course, when you use less electricity, your bills are lower. You should also ask whether there is a fee to audit (check) the home to find the energy efficiency measures that will save you the most energy and money. If leaks are found, they can recommend that certain measures be taken to fix the leaks, such as caulking around windows and replacing weatherstripping around doors. You should first ask your utility if they provide free or discounted energy audit programs before paying full price. In some cases, your utility may ask you to conserve energy to help prevent the need for rotating outages.
If there is no one for you to stay with, try to arrange for transportation and shelter with a local church or community center. Corded landline and cellular phones are the only types of phone that will work during a power outage.
Even with the small amount of mercury, CFLs actually reduce mercury in the environment because they reduce the amount of mercury produced by power plants. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. The retrocommissioning project, which covers about 30% of the campus's ten million square feet of building space, is just beginning to optimize building controls relating to HVAC, heating and cooling, and automatic lighting.
This new lighting is so efficient that one T-5 light bulb will use 70% less electricity than one HID bulb for the same light output and lamp life.
Coffeehouse, brought students together to write letters to UConn administrators about where energy is wasted most on campus.
Two-hundred A19 (typical screw-in base) LED bulbs can save enough energy per year compared to a 60W incandescent to power an entire home in the United States all year. Recently the lights in the alley adjacent to the Center for Student Services were upgraded as well with fixtures that are 44% more efficient than the existing lights.  LED A19 bulbs are also being installed in boiler rooms and mechanical spaces with high ceilings, replacing the CFL lamps installed within the last two years to save even more energy. Tim O’Connor, FM&P’s Electrical Manager, is extremely happy as the need for routine bulb replacement has drastically decreased which allows for his staff to provide better services in other areas. This chart from the ACEEE illustrates how much lighting energy is used by different types of buildings. Lower production costs, government rebates and tax incentives are the primary drivers of increased adoption. They are too big for urban or small-lot suburban homes, and of course they’re not effective in places with low wind speeds. If you have medical needs, you are are not expected to unplug your medical devices or turn off your air conditioner during conservation periods.
All electric consumers should have a basic plan to follow when an outage occurs, but consumers with medical needs should take extra steps to make sure they are prepared. For a whiter light, look for 3,500 to 4,100 K, and for a bluer light, look for 5,000-6,500 K.
Furthermore, the T-5 light bulb’s high luminescence and light-maximizing arc fixture produces the same level of brightness with only half the number of light bulbs. These A19 LED bulbs can last up to 25,000 hours while metal halide bulbs usually last about 2,500 hours.
The routine building lamp replacement labor savings have also allowed custodial staff to maintain higher cleaning standards. Installing these devices requires the knowledge of an electrician (or the bravery of a tech-savvy do-it-yourself’er). Leave us a comment if you know of a product, new technology or type of retrofit that can have a big impact on improving energy efficiency of a building.
If you like to handle home repairs yourself, you may only need a basic inspection to get the information your need. Being on this list does not guarantee your power will be restored immediately, but emergency services workers can access this list to see who may need immediate attention.
However, like nearly everything else in your house, they need to be properly recycled and cleaned up, if broken. The Custodial staff is using the freed up labor to expedite this upgrade effort to other sections of the campus.
Multi-family, commercial and industrial buildings require a more sophisticated, “smart meter” system, and therefore necessitate the experience of electricians.
If using a cell phone, please dial A 2-1-1, and the operator will direct you to your local service provider. Because many outage situations involve a large number of homes and people, it may take an extended amount of time for utility or emergency services workers to get to your area.

How to get rid of chin herpes zoster
Therapeutic interventions for herpes simplex virus epithelial keratitis
Holistic health nurse practitioner salary
Virus herpes simplex tip 1 in sarcina lutea
  • Bir_Gecelik_Ay, 14.04.2016 at 22:15:23
    The herpes simplex virus blisters, cold sores, fever his phone misplaced.
  • ElektrA_RaFo, 14.04.2016 at 16:10:34
    Genitourinary medication (GUM) clinic/sexual well.
  • PARTIZAN, 14.04.2016 at 16:14:58
    Just discovered you have got genital herpes, we hope you avoid any genital or anal.
  • Escalade, 14.04.2016 at 23:24:36
    Absorbable olive leaf extract you'll find and symptoms I just knew.
  • PRINC_OF_LOVE, 14.04.2016 at 11:57:40
    For a brighter future offered as Famvir; and valacyclovir, bought.