This site is for people who want to learn how to assess home and office environments for electromagnetic fields, and how to remediate electromagnetic safety problems if they exist.
7 ) Reducing Cell Phone Headsets, Cell Phone Cases This is the best headset-the one where the sound travels up the plastic air tube limiting the amount of radiation to your brain from either cell phones or portable phones.
Return Policy: 14 days to return unopened items in new condition for refund of purchase price less shipping and handling and 20% restocking fee. To obtain the E-Book, Public Health SOS: The Shadow Side of the Wireless Revolution, which goes into depth on safety and remediation concerns for consumers click here. Covering a bandwidth of 50 MHz to 3.5 GHz, digital and analog, this instrument is incredibly versatile. The ESI 24 has an Enhanced RF, allowing the user to measure only RF using all 15 LEDs, giving greater range and resolution. Its magnetic resolution is extremely fine at 10 microgauss, but its top end at 20 mG will leave you wondering at an out-of-range indicator in areas with stronger fields.
The electric field setting ranges from 1 to 2,000 volts per meter, and actually uses the operator’s body in its detection, making it unique but a bit awkward.
All in all, for the price, this is a very useful and accurate, if slow, gaussmeter, and also actually measures electric fields, if you don’t mind the inconveniences. This reasonably priced meter features a large backlit display that simultaneously displays both electric field and magnetic field readings. This little unit won’t actually measure anything numerically, but is a great sniffer-outer of magnetic fields, letting you listen in to their hums, buzzes, clicks and squeals. This is a very sensitive meter, designed to detect everything from 1-2500 MHz and can differentiate between distant sources like cell towers and nearby sources like cell phones.
The Gauss Master can also be affected by higher frequency radiation (cell phones and other RF), but this can be remedied if you suspect it by finding the highest reading and then shielding the meter with your body – holding it close and turning around in a circle (always keeping the meter oriented in the same absolute direction). It uses a standard 9 volt battery, and comes with useful instructions on how to conduct a magnetic field survey.
The Acoustimeter shows average, peak and peak hold levels of radio frequency electromagnetic fields.
The Acoustimeter is a broadband instrument that measures the radiation in the range 200 MHz to about 8000 MHz (8 GHz), which covers the frequencies used by most modern communication systems encountered in our daily life. Note: Fields are best measured when the instrument is behind the source, as the internal antenna is at the upper back of the meter’s case.
This Geiger counter detects Alpha, Beta, Gamma, and X-rays with an easy to read red light count and audible indicator. This pocket sized Geiger counter detects Beta and Gamma (0.1~1 MeV) and is sensitive enough to measure background levels. This pocket sized Geiger counter measures 5”x3”x1” and comes with a rechargeable 9V battery, although an alkaline 9V battery, AC power adapter (or vehicle adapter) can be used as well. This washable microwave shielding keeps its conductors on the inside of the fabric threads so there’s no metal flaking and, while letting in air and light freely, reduces exposure to 300 MHz to 3 GHz radiation by more than 20 dB (that’s 99%). Swiss Shield fabrics are lightweight RF shielding fabrics that are highly effective as well as attractive. This fabric is high-quality, translucent, lightweight, semi-transparent and has all textile characteristics. This is a very soft, light grey cotton knit fabric woven with silver that is comfortable and washable.
In addition to RF shielding, this film reduces heat gain in the summer by up to 79%, and heat loss in the winter, and makes windows opaque from the outside when the sun is on them, without reducing visibility from the inside. You can find professional installers in most areas if you don’t want to do it yourself. Please note, with some lighter weight shielding fabrics, which may not shield 100%, sometimes just using carbon laminate underneath the fabric to absorb stray microwaves can do the job. The surface of this paint is highly conductive (about 10 ohms per square), and attenuation is consistent no matter what the polarization of the signals because of its holohedral carbon structure, without fibers or meshes. It’s RoHS compliant, comes in black only, covers 50 to 100 square feet (5 to 10 square meters) per liter, and can be covered with latex paint, wallpaper, etc. The minimum temperature for applying it is 1°C (33.8°F), and it can be shipped in the winter or any other season. Strong magnetic field emissions (depending on how much electric current is flowing) and electric field emissions from a circuit breaker box (or fuse box) in any living space can be hazardous. Not for testing Washington politicians, this meter lets you detect levels of dirty power in home or office wiring, which can be corrected by installing Graham-Stetzer Filters (see below). No batteries are required – just plug it into a standard 2-or-3 prong or GFCI outlet and read the display.
Wherever there are active dimmer switches, electric motors, fluorescent lights (including CFLs), transformers, and many other electric-noise producing products, you also find dirty power in the form of microsurges – spikes of higher-frequency on the normally extremely low frequency (ELF) power in our homes and offices. They use no extra electricity but simply act to clean the electricity moving through the electrical system, which can make other electrical appliances run more efficiently and may actually reduce your utility bills.
Though they can be ordered one at a time, the normal package of 20 units will clean the power of an entire, average-size home or office.
AIR TUBE headsets are designed to minimize your exposure even more because there are no speakers or electronics (no EMF) in the earpiece itself.
When carrying a cell phone in your pocket, your vital and reproductive organs and all systems of your body are being exposed to microwave radiation, which dissipates internal. This dent resistant case blocks microwave signals directed toward your head and body without blocking the signal to the cell tower, allowing you to make and receive phone calls. Simply flip the lid of the Cruz Case open to receive and make calls, then close back into protective mode.
While you can use this good-looking leather cell phone case in your pocket or purse, it is also useful for those wanting to put their cell phone in a holster attached to the belt.
Headset wires (and anything else metallic) can become an antenna for high-frequency signals and noise, and transmit the RF to your head. This is a fabulous home or office phone for people who are sensitive to the strong magnetic fields associated with the handset, speakerphone or telephone base of many conventional telephones. Desktop or wall mount corded telephone (no microwaves) combined with a special ultra low EMF headset. EMP Faraday Bags are designed to protect sensitive electronics and other items against EMP current, static discharge, microwave transmission, RFID snooping and moisture damage. Decrease your radiation exposure by 95%, simply by increasing the distance between the phone and your head and body with this stylish black handset. We do not accept responsibility or liability for any product that we sell, we do not claim that our items are designed to treat or cure illnesses and my products are for experimental purposes only. Our philosophy is that one should first learn how to clean up one’s personal environment, and especially one’s sleeping and office environments where one spends long hours. There you will also find much valuable educational content on this emerging public health issue.

You’ll find a range of meters and detectors here for electric, magnetic and radiofrequency fields, so you can start becoming an EMF detective. Create a bedroom sleep sanctuary so you rest undisturbed by electromagnetic fields and wake up more refreshed in the morning. Shielding fabric by the foot can be used to line curtains, walls and can even be put under carpets or desk chair pads to shield from the Wi-Fi of neighbors downstairs. Placing plastic shielding film on glass windows can significantly block out ambient radiofrequency radiation-from where it comes into the building most easily.
If you must use a cell phone, using this headset will reduce radiation to the brain significantly. Easy to read display indicates field strength with either a red, yellow, or green led lights, along with an audio confirmation of the field strength. Sources detected by ESI 24: cell phone towers, cordless phones, wireless LAN, Wi-Fi systems, power lines, electrical installations and appliances, baby monitors and alarms, microwave ovens, cell phones, etc.
It’s overall sensitivity is much wider, though, from about 5 Hz to 7,000 Hz (at 3 dB accuracy). Another slow-down for those used to readings in milligauss is that this meter reads in nanotesla.
You have to plug a ground wire (generously long, at least) into the meter, with the other end grounded somewhere, and always keep the wire behind you while you hold the meter close to your body, making it necessary to get up close and personal with whatever you’re measuring. Their more expensive combination meter is actually less useful than this one because it’s bandwidth is too broad for ELF testing, which is what most AC gaussmeters are designed and used for. It operates on a standard 9 volt battery, and comes with an excellent, very informative manual and a 2 year warranty. Can be used to check for emissions from powerlines, household wiring, appliances, and anywhere that electricity is flowing.
It will even give you a relative indication of their field strength – louder means stronger.
The meter has an analog readout on a relative scale to make direction finding fast and easy. That wouldn’t be much of a problem except that it shuts itself off automatically after five minutes, so you can sometimes think the fields are very low when the meter has just said goodnight. If the readings don’t change significantly, you can usually assume that RF is not a problem. It covers the spectrum from TETRA up through and beyond the 5.6 GHz WiFi and WiMax frequencies. The Acoustimeter was designed using the experience from many years of practical RF and microwave measurements. The LEDs update rapidly, and allow you to quickly gauge the levels in an area and find hot-spots.
It is best to measure signals with the source behind the instrument or to one or other side (particularly the left side away from the switches and volume control).
Use for checking sources of radiofrequency fields, such as smart meters, Wi-Fi, cell towers, cellphones and other wireless devices.
It will log data with a time stamp every second, minute, or hour and can be connected to a PC ( Windows XP, Vista and 7) through a USB port to download, analyze and manipulate your data. There’s enough material to shield above and around the sides of the bed, with plenty of head room.
They shield from cellphones and cell tower radiation, cordless phones, wi-fi, radar, microwave oven leakage, TV broadcast, etc.
It is a very attractive, ecological, unbleached ecru-white cotton fabric with zero chemicals, preferred by the natural and health conscious consumer. It gets good light penetration as well as air circulation, so it is especially appropriate for bed canopies and curtains, though depending on how much RF there is sometimes people prefer double layers. Appealing as a shielding option when you’d rather not use only reflecting shielding (to protect people in the vicinity whom the waves might be reflecting towards).
With a pure acrylic binder, it adheres well to masonry, cement, plaster, construction board, polystyrene, latex paint, and many other surfaces, is frost-resistant, dries quickly, cleans up with water, and comes ready to use. About 10% of the shielding is accomplished through the carbon’s good RF dissipation, which reduces reflections from both outside and inside the area to be shielded.
Otherwise, for a simple solution use this method: Hang a framed picture that has high-performance Giron shielding material adhered to the back of it over the circuit breaker box. The filters mitigate low frequency noise between 4 and 100 kilohertz, and this meter is designed to measure microsurges – voltage spikes – in that frequency range and display them as a numerical equivalent, in volts per second, of such noise. It works for 60 Hz, 120 Volt North American and 50 Hz, 240 Volt European systems (but an ordinary plug adapter is needed for European or other electrical outlets). This higher-frequency noise has been associated with symptoms of electrosensitivity (skin rashes, insomnia, depression, headaches, inability to concentrate, memory problems, fatigue, etc.), and possibly even more serious diseases like cancer.
Each can easily be moved from one outlet to another as needed (for a detector of dirty power, see the DIRTY POWER METER above). Using a headset to increase the distance from the phone to your head dramatically reduces your radiation exposure. The sound is carried through a tube into your earpiece, so that radiation and EMF can’t travel through the wire into your ear. The Pocket Patch is designed to protect your body from 99% of the radiation being emitted by your cell phone while carrying it. This is for people who prefer for comfort the ‘over-the-head’ style to headsets with only an earbud.
A ferrite bead acts like a sponge for high frequencies and keeps them from continuing on to the ends of the wires closer to your body. The special headset cord is about 3 feet long and uses a clear plastic tube to carry the sound to your ear.
I chose the colour and crystals based on what I want my device to accomplish and their individual properties. We recommend that you consult your doctor or health care professional before using any of our items.
To that end, we offer you a selection of high value-added and economical measurement and safety resources screened and described by expert EMF consultant, Stan Hartman of Radsafe in Boulder, CO. It is only when you measure the fields that you can know what fields are present, and how, and from what direction, to remediate with assurance. People who are electrically sensitive find shielding bed canopies essential, as do high performance athletes and, increasingly, business executives bathed in frequencies all day.
This is especially so in downtown urban environments or where one is operating electronic equipment of various kinds. Will pick up the new 5.8 GHz phones as well as other RF equipment such as DECT portable phones, wireless routers, baby monitors, etc. Its very low frequency cutoff makes it versatile but slow (on the magnetic setting), because whenever you move it you have to wait a couple seconds for it to settle down and give you an accurate reading.

That can be remedied by putting a decimal point on the display with a felt-tip pen between the second and third numerals from the right – as long as you remember to ignore it when reading electric fields. This does away with the need for a long handle so your body doesn’t interfere with the field, but since no one’s bodily electric field is exactly the same, how accurate can it be on the electric field setting? The audio output of this meter, incidentally, is not really sensitive enough to be very useful. You can get around that, though, by just pressing the ON button more than once every 5 minutes (holding it down is what selects the more sensitive range).
Remember, as with any single-axis meter, to take three readings 90? from each other (see the DIGITAL COMBINATION METER above).
It under-reads if the source is in front of the meter as the LCD display acts as an RF screen. The data can be transferred to and analyzed on a computer or a datalogger (USB cable and Pc software included).
It’s made of Swiss Shield Daylite fabric, which is 100% Tergal® polyester net-knit, over the 5% silver-plated copper conductors.
You simply cut it to size, peel the backing, wet it, and apply, then squeeze out any air pockets. The carbon material has a plastic laminate on it for ease of handling, reduced carbon dust and durability. By turning on various appliances (compact fluorescent bulbs, blenders, computers, laser printers, etc.) one at a time and taking readings, you can get a sense of which are the biggest polluters. These small filters, when inserted into wall outlets, reduce this higher frequency noise, resulting in relief for many people. Made of high performance shielding material, Pocket Patch is an iron-on patch that reflects radiation away from your body. The moisture barrier performance exceeds foil laminates for low Moisture Vapor Transmission Rate (MVTR), even after flexing. This handset has less echo than some hands free sets, has an answer key and volume control. Caution: Needs grounding and should not be installed without the services of an electrician.
The display shows 5 levels, ranging from extremely low to too strong for prolonged exposure and distinguishes how much for each radiation type.
Remember that with a single-axis meter you really need to take three readings 90? from each other (find the orientation with the highest reading and visualize the meter flat against one surface of the corner of a box, then take readings flat against each of the other two sides) to get the true flux density. The much cheaper Gauss Master, and Budget Buzz Stick (see below), are much better at audio indication of magnetic fields.
It will show you magnetic phenomena that a gaussmeter is incapable of detecting, like very low 1 Hz clicks from a digital clock, computer clock, or thermostat, pulses from a cell phone battery, and very strange noises from some GFCI outlets that may make you wonder if there’s a listening device in your kitchen.
Don’t depend on it for accuracy, though the analog meter is calibrated in milligauss, but it will definitely show you where magnetic fields are and give you a ballpark sense of their strength.
Includes an optional sound feature that allows you to hear the intensity of the field and an alarm to indicate higher exposure levels. Can be used over a wide range of temperatures (-30° to 90°C) to shield electronic components, make draperies, tents, mobile phone shields, and more.
The fabric allows air flow, is machine washable (use TexCare) and can be cut and sewn like ordinary fabric. Some use Daylite™ for head coverings, but we do not advise this, as many experts urge caution about using shielding fabrics on the body.
It’s good to cut it a little large so you can then use an exacto knife to trim it as close to the frame as possible, especially along the vertical edges.
Sometimes more than one layer of the carbon laminate is needed to reduce the microwaves to zero, but note with the carbon laminate this can be accomplished at a much lower cost than using multiple layers of the shielding fabrics.
Tests have found a 50-70% reduction of magnetic field from a 2-foot section of Giron in a 24×36 inch frame. The rule of thumb is that any outlet reading higher than 50 should get a filter – especially if it’s in an area frequently occupied (bedroom, office, etc.). They’re very light, grey in color, and about an inch long, with a minimum of 50 ohms impedence. Now the Danburite and Mookaite both physically and emotionally help with the damage caused. Also, do not put shielding paint on the walls if the room will contain RF emitting devices, such as computers, cell phones, wi-fi, compact fluorescent bulbs, etc. It has a selectable audio alarm with adjustable sensitivity, selectable auto-off, and backlighting that automatically turns off after 30 seconds. If two of the readings are much lower than the highest one, you can usually get away with just increasing the highest reading a bit and calling it right, but if one or more of the lower readings is close to the highest one, you need to do the calculation – square each reading, add them together, and take the square root of the sum. The pitch of the sounds can even be like an audio frequency counter, giving you an indication of what frequency spikes and harmonics are present. It has a selectable super-sensitive setting (1 mG full scale); the normal scale is 1-10 mG. They fit wires 5 mm in diameter or less (you can knot smaller wires at each end of the bead to keep it in place). Please note if you already have a phone with a headset jack you only will need to buy the headset alone and not the telephone. The little pickup coil on a 2-foot cable can also find fields in hard-to-reach spots you could never get a gaussmeter into, much less read it. It also has a very useable audio output, which can impress children more than a meter needle when they hear it squeal insanely close to the microwave oven or the electric range.
The analog meter features a quenched uncompensated Geiger Mueller tube with a thin mica window. Comfortable, solid feel that stays in place better than headsets with earbuds and goes on quicker.
The display also includes an analog bar graph, and is switch-selectable between instantaneous value, maximum value, or average value.
Some use for clothing though we do not advise this as this, as many experts urge caution about using shielding fabrics on the body. Just make sure that it is placed between the phone and your body—NOT on the outward side of the pocket as that would reflect the fields back towards you. Displays instant value, max value or average value, where the average value interval is adjustable from 4 seconds to 15 minutes.
This shields the radiation on the side of your body (or the side of your purse facing your body), but still allows the phone to ring.

How to protect vs emp jammer
Emergency action plan for osha
Disaster management project on uttarakhand
Free english movies with subtitles online

Rubric: Blacked Out Trailer


  1. Busja
    Crawly??especially if we are hiding out from all breaking or weathering guns to crossbows to defeat your enemies.
  2. R_O_M_E_O
    I suggest using the cell telephone and.
    Does not mean you and Americans seem.
  4. ZAYKA
    Considerations for these units and five years use my Gerber Rex Applegate Covert.
  5. MAMBO
    With electromagnetic pulse Audible Narration Playing.